PMI FDWE2010 high lead ball screws are essential components for high-speed machine tools in the next century.
Features
PMI FDWE2010 high lead ball screws must have high rigidity, low noise and thermal control. PMI's design and processing have the following characteristics:
High DN value
Under normal circumstances, the DN value of PMI FDWE2010 ball screws can reach 130,000. In some special cases, such as in fixed end cases, the DN value can be as high as 140,000.
High speed
PMI's high-speed ball screws provide machine tools with 100 m/min or even higher moving speeds for high-performance cutting.
High rigidity
Both the screw and the ball nut are surface hardened to a specific hardness and hardened layer depth to maintain the high rigidity and durability of the PMI FDWE2010 ball screw.
A variety of thread heads are available to fit more balls into the ball nut, improving rigidity and durability.
SCREWSIZE | BALL DIA. |
EFFECTME TURNS drcuit X roW |
BASIC RATELOAD (kg | NUT | FLANGE | FIT | BOLT | OILHOLE | STIFFNESS | |||||||||
0D. | LEAD | Dynamic (1×10⁵REV) Ca |
Static Co |
Dg6 | L | A | T | W | G | H | S | X | Y | Z | Q | kgf⁴m | ||
12 | 10 | 2.381 | 2.5×1 | 420 | 720 | 30 | 102 | 50 | 10 | 40 | 16 | 32 | 104.5 | 8 | 4.4 M6x1P | 30 | ||
20 | 103.969 | 2.5×1 3.5×1 |
1210 1580 |
2380 3230 |
46 | 113 133 |
73.513592550105.59.55.5 M6×1P | 51 68 |
||||||||||
163.969 | 1.5X1 2.5×1 |
830 1210 |
1530 2380 |
46 | 128 160 |
73.513592550105.59.55.5 M6×1P | 35 51 |
|||||||||||
20 3.969 1.5×1 | 830 | 1530 | 46130 | 73 13 59 25 50 105.5 9.5 5.5 M6x1P | 35 | |||||||||||||
25 | 16 | 3.969 | 1.5×1 2.5×1 |
920 1340 |
1930 3000 |
58 | 126 158 |
85 | 15 | 71 | 32 | 64 | 15 | 6.6 | 11 | 6.5 | M6x1P | 41 61 |
20 | 4.762 | 1.5×1 2.5×1 3.5×1 |
1170 1710 2220 |
2300 3580 4860 |
58 | 154 194 234 |
85 | 15 | 71 | 32 | 64 | 15 | 6.6 | 11 | 6.5 | M6×1P | 43 63 83 |
|
32 | 16 | 3.969 | 1.5×1 2.5×1 3.5×1 5×1 |
1010 1470 1910 2340 |
2480 3860 5240 6620 |
62 | 132 164 196 228 |
108 | 15 | 90 | 41 | 82 | 15 | 9 | 14 | 8.5 | M8×1P | 49 73 96 120 |
16 | 6.35 | 2.5×1 3.5×1 5×1 |
2830 3680 4490 |
6090 8270 10450 |
173 74 205 237 |
108 | 18 | 90 | 41 | 82 | 151117.511 | M8×1P | 80 105 131 |
|||||
20 | 3.969 | 1.5×1 2.5×1 3.5×1 5×1 |
1010 1470 1910 2340 |
2480 3860 5240 6610 |
134 174 62 214 254 |
108 | 15 | 90 | 41 | 82 | 15914 | 8.5 | M8×1P | 49 73 96 120 |
||||
20 | 6.35 | 2.5×1 3.5×1 5×1 |
2830 3680 4490 |
6090 8270 10450 |
74 | 204 244 284 |
1081888 | 41 | 82 | 151117.511 M8x1P | 80 105 131 |
Copyright © Jingpeng Machinery&Equipment(Shanghai) Co.,Ltd All Rights Reserved