PMI FDVC2505 Double Nut Ball Screw 2505 Grinding Ball Screw

The PMI FDVC2505 Ball Screw support methods include the following:

Double push and one free type is equipped with a thrust bearing at one end and the other end is suspended. PMI FDVC2505 Ball Screw Because one end is in a free state, it has small load-bearing capacity and low axial stiffness.

Double push and one simply supported type, PMI FDVC2505 Ball Screw one end is equipped with a thrust bearing and the other end is equipped with a radial ball bearing. The axial stiffness is not too high. When using it, attention should be paid to reducing the influence of thermal deformation of the screw. When installing, attention should be paid to making the heat source and screw work. The commonly used section should be away from the end where the thrust bearing is installed to avoid gaps in the thrust bearing due to thermal elongation of the screw.

Single-thrust thrust bearings are installed at both ends of the PMI FDVC2505 Ball Screw and preloaded. It can improve the axial stiffness of the ball screw; when pre-stretching is installed, the pre-tightening force is larger, so the screw only bears tensile force when working.

Porduct model FDVC 1605 FDVC 2005 FDVC 2006 FDVC 2505 FDVC 2506 FDVC 2510 FDVC 2805 FDVC 2806 FDVC 3205 FDVC 3206 FDVC 3208 FDVC 3210 FDVC 3606 FDVC 3610 FDVC 4005 FDVC 4006 FDVC 4008 FDVC 4010 FDVC 4510 FDVC 4512 FDVC 5005 FDVC 5006 FDVC 5008 FDVC 5010 FDVC 5012 FDVC 5510 FDVC 6310 FDVC 6312 FDVC 6316 FDVC 8010 FDVC 8012 FDVC 8016