تقسيم الرأس

• How to Operate a Dividing Head for Accurate Milling

  First, you would have to attach the piece of metal that you were going to cut to use Jingpeng's dividing head correctly. After that, it is locked and clamped down, and you can set the dividing head to the appropriate angle. You adjust this with a digital protractor or an ordinary protractor. Then you need to set the index plate and indexing pin after you have set the angle. These components assist me in laying out the cuts. You can then gently rotate the dividing head to achieve the required cuts. A dividing head is used in conjunction with a milling machine. It rotates simultaneously to the tool that is cutting. Setting the distance of each cut is key to getting your angles correct and having your parts fit together.

• Types of Dividing Heads and Their Applications

  Jingpeng produces another types of dividing heads also and they all lean towards certain types of work. Perhaps the most well known one is the simple dividing head. This is the most straightforward and ideally used for simple type scenarios. Division heads are not outrageously costly, they are highly convenient to utilize, and the setup time is negligible. Another type is the helical dividing head, which is also called a spiral dividing head. This type is unique because the machine can cut at different angles for each section. This is ideal when making gears and other components require an angled cut. The universal dividing head is the most complicated type. It’s very versatile and can chop angles in lots of directions. This type can cut a variety of patterns, and can be fixed to work with all types of tracers, thus increases its versatility.

• Precision Dividing Techniques with a Dividing Head

  A dividing head is one of the more valuable tools in your arsenal for cutting metal exactly and mindfully. In a dividing head the piece of metal must be held down uniformly extraordinarily rigid. For instance, the cutting tool must be sharp to allow for sharp cuts. Correct indexing is required for precision cutting. The spacing between the cuts needs to be right; if it is, then the cuts can be imprecise, which might create difficulties later on. So you have to keep checking the divisions to not make a mistake. Precision machining is one such arena that takes time and patience to master. But with the dividing head of Jingpeng, it is more convenient for hard workers to manufacture the accurate parts they require.

لماذا الاختيار ؟

فئات المنتجات ذات الصلة

• دليل خطي
• دليل الحركة الخطية
• السكك الحديدية دليل خطي صغير
• دليل خطي صغير
• دليل خطي لهرمون النمو
• دليل خطي HGW
• دليل خطي 3 مم
• دليل خطي 5 مم
• كتلة المنزلق
• دليل خطي الأسطوانة

لم تجد ما تبحث عنه؟
اتصل بمستشارينا لمزيد من المنتجات المتاحة.