THK SHS25LVM Linear Guide Structure and Features
The steel balls roll along the four rows of precision-ground rolling surfaces on the THK SHS25LVM Linear Guide LM track and LM slider; the steel ball rows are made to circulate in circulation through the ball retainer and the end cover plate assembled on the LM slider. In order to have the same rated load in the four directions of action on the LM slider (radial, reverse radial and lateral directions), each steel ball row is designed to be arranged with a contact angle of 45°, so it can be used in any posture. use. Because it can apply equal preload, it maintains a low friction coefficient and improves the rigidity in four directions.
THK model SHS15V SHS15M SHS15LV SHS15LVM SHS20V SHS20VM SHS20LV SHS20LVM SHS25V SHS25VM SHS25LV SHS25LVM SHS30V SHS30LV SHS35V SHS35LV SHS45V SHS45LV SHS55V SHS55LV SHS65V SHS65LV
| Model No | Outer dimensions | LM block dimensions | Pilot hole for side nipple | |||||||||||||
| Height
M |
Width
W |
Length
L |
B | C | SX/ | L₁ | T | K | N | Grease nipple |
eo | fo | D₀ | |||
| SHS 15V SHS 15VM |
24 | 34 | 64.4 | 26 | 26 | M4×4 | 48 | 5.9 | 21 | 5.5 | 5.5 | PB1021B | 4 | 4 | 3 | |
| SHS15LV SHS 15LVM |
24 | 34 | 79.4 | 26 | 34 | M4×4 | 63 | 5.9 | 21 | 5.5 | 5.5 | PB1021B | 4 | 4 | 3 | |
| SHS 20V SHS 20VM |
30 | 44 | 79 | 32 | 36 | M5×5 | 59 | 8 | 25.4 | 6.5 | 12 | B-M6F | 4.3 | 5.3 | 3 | |
| SHS 20LV SHS 20LVM |
30 | 44 | 98 | 32 | 50 | M5×5 | 78 | 8 | 25.4 | 6.5 | 12 | B-M6F | 4.3 | 5.3 | 3 | |
| SHS 25V SHS 25VM |
36 | 48 | 92 | 35 | 35 | M6×6.5 | 71 | 8 | 30.2 | 7.5 | 12 | B-M6F | 4.5 | 5.5 | 3 | |
| SHS15LV SHS 15LVM |
36 | 48 | 109 | 35 | 50 | M6×6.5 | 88 | 8 | 30.2 | 7.5 | 12 | B-M6F | 4.5 | 5.5 | 3 | |
| SHS 30V SHS 30LV |
42 | 60 | 106 131 |
40 | 40 60 |
M8×8 | 80 105 |
8 | 35 | 8 | 12 | B-M6F | 5.8 | 6 | 5.2 | |
| SHS 35V SHS 35LV |
48 | 70 | 122 152 |
50 | 50 72 |
M8×10 | 93 123 |
14.7 | 40.5 | 8 | 12 | B-M6F | 6.5 | 5.5 | 5.2 | |
| SHS 45V SHS 45LV |
60 | 86 | 140 174 |
60 | 60 80 |
M10×15 | 106 140 |
14.9 | 51.1 | 10.5 | 16 | B-PT1/8 | 8 | 8 | 5.2 | |
| SHS 55V SHS 55LV |
70 | 100 | 171 213 |
75 | 75 95 |
M12×15 | 131 173 |
19.4 | 57.3 | 11 | 16 | B-PT1/8 | 10 | 8 | 5.2 | |
| SHS 65V SHS 65LV |
90 | 126 | 221 272 |
76 | 70 120 |
M16×20 | 175 226 |
19.5 | 71 | 19 | 16 | B-PT1/8 | 10 | 12 | 5.2 | |
| H₃ | LM rail dimensions | Basic load rating | Static permissible moment kN·m* | Mass | |||||||||||
| Width
W₁ |
W₂ | Heig
M: |
Pitch
F |
d₁Xd₂Xh | Length*
Max |
C
kN |
C₀
kN |
MA | Mg | Mc | LM blockkg |
LM railkg/m |
|||
| 1 block |
Double blocks |
1 block |
Double blocks |
1 block |
|||||||||||
| 3 | 15 | 9.5 | 13 | 60 | 4.5×7.5×5.3 | 3000 (1240) |
14.2 | 24.2 | 0.175 | 0.898 | 0.175 | 0.898 | 0.16 | 0.19 | 1.3 |
| 3 | 15 | 9.5 | 13 | 60 | 4.5×7.5×5.3 | 3000 (1240) |
17.2 | 31.9 | 0.296 | 1.43 | 0.296 | 1.43 | 0.212 | 0.22 | 1.3 |
| 4.6 | 20 | 12 | 16.5 | 60 | 6×9.5×8.5 | 3000 (1480) |
22.3 | 38.4 | 0.334 | 1.75 | 0.334 | 1.75 | 0.361 | 0.35 | 2.3 |
| 4.6 | 20 | 12 | 16.5 | 60 | 6×9.5×8.5 | 3000 (1480 |
28.1 | 50.3 | 0.568 | 2.8 | 0.568 | 2.8 | 0.473 | 0.46 | 2.3 |
| 5.8 | 23 | 12.5 | 20 | 60 | 7×11×9 | 3000 (2020) |
31.7 | 52.4 | 0.566 | 2.75 | 0.566 | 2.75 | 0.563 | 0.54 | 3.2 |
| 5.8 | 23 | 12.5 | 20 | 60 | 7×11×9 | 3000 (2020) |
36.8 | 64.7 | 0.848 | 3.98 | 0.848 | 3.98 | 0.696 | 0.67 | 3.2 |
| 7 | 28 | 16 | 23 | 80 | 9×14×12 | 3000 | 44.8 54.2 |
66.6 88.8 |
0.786 1.36 |
4.08 6.6 |
0.786 1.36 |
4.08 6.6 |
0.865 1.15 |
0.94 1.16 |
4.5 |
| 7.5 | 34 | @ | 26 | 80 | 9×14×12 | 3000 | 62.3 72.9 |
96.6 127 |
1.38 2.34 |
6.76 10.9 |
1.38 2.34 |
6.76 10.9 |
1.53 2.01 |
1.4 1.84 |
6.2 |
| 8.9 | 45 | 20.5 | 32 | 105 | 14×20×17 | 3090 | 82.8 100 |
126 166 |
2.05 3.46 |
10.1 16.3 |
2.05 3.46 |
10.1 16.3 |
2.68 3.53 |
2.54 3.19 |
10.4 |
| 12.7 | 53 | 23.5 | 38 | 120 | 16×23×20 | 3060 | 128 161 |
197 259 |
3.96 6.68 |
19.3 31.1 |
3.96 6.68 |
19.3 31.1 |
4.9 6.44 |
4.05 5.23 |
14.5 |
| 19 | 63 | 31.5 | 53 | 150 | 18×26×22 | 3000 | 205 253 |
320 408 |
8.26 13.3 |
40.4 62.6 |
8.26 13.3 |
40.4 62.6 |
9.4 11.9 |
8.41 10.7 |
23.7 |
Subscribe to our newsletter for daily new and updates
Shanghai, China
YOSOmachinery
Copyright © Jingpeng Machinery&Equipment(Shanghai) Co.,Ltd All Rights Reserved
EN
AR
BG
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RU
ES
SV
TL
ID
UK
VI
HU
TH
TR
FA
AF
MS
SW
GA
CY
BE
KA
LA
MY
TG
UZ
