Externa cirkulationsdesignen kan hantera hög belastning, hög hastighet och hög försnabbning. Hög stelhet, låg buller, hela längden är upp till 10 meter, utsträckningslängden kan nå upp till 19 meter, den nominella dynamiska belastningen är 126 ton, den nominella statiska belastningen är 595 ton
| Modellnummer | Skruvaxels yttre diameter d | Förskjutning Ph | Boll centrums-till-centrums diameter dp | Trådmindradiameter dc | Antal belastade kretsar Rader X varv | Grundlastvärde | Stelhet K N/um | |
| Ca KN | Ca KN | |||||||
| :5510-2.5 | 55 | 10 | 56.75 | 49.5 | 1x2.5 | 33.4 | 97 | 490 |
| :5510-5 | 55 | 10 | 56.75 | 49.5 | 2x2.5 | 60.7 | 194 | 950 |
| :5510-7.5 | 55 | 10 | 56.75 | 49.5 | 3x2.5 | 85.9 | 291.1 | 1390 |
| 5512-2.5 | 55 | 12 | 57 | 49.2 | 1x2.5 | 39.3 | 108.8 | 500 |
| :5512-3 | 55 | 12 | 57 | 49.2 | 2x1.5 | 46 | 131.3 | 590 |
| 5512-3.5 | 55 | 12 | 57 | 49.2 | 1x3.5 | 52.4 | 152.9 | 680 |
| :5512-5 | 55 | 12 | 57 | 49.2 | 2x2.5 | 71.3 | 218.5 | 960 |
| 5512-7.5 | 55 | 12 | 57 | 49.2 | 3x2.5 | 100.9 | 327.3 | 1420 |
| 5516-2.5 | 55 | 16 | 57.7 | 47.9 | 1x2.5 | 76.1 | 201.9 | 650 |
| 5516-5 | 55 | 16 | 57.7 | 47.9 | 2x2.5 | 138.2 | 402.8 | 1280 |
| 5520-2.5 | 55 | 20 | 57.7 | 47.9 | 1x2.5 | 76 | 201.9 | 660 |
| 5520-5 | 55 | 20 | 57.7 | 47.9 | 2x2.5 | 138.2 | 403.8 | 1280 |
| 6310-2.5 | 63 | 10 | 64.75 | 57.7 | 1x2.5 | 35.4 | 111.7 | 550 |
| 6310-5 | 63 | 10 | 64.75 | 57.7 | 2x2.5 | 64.2 | 222.5 | 1050 |
| :6310-7.5 | 63 | 10 | 64.75 | 57.7 | 3x2.5 | 90.9 | 334.2 | 1550 |
| 6312A-2.5 | 63 | 12 | 65.25 | 56.3 | 1x2.5 | 48.1 | 139.2 | 560 |
| :6312A-5 | 63 | 12 | 65.25 | 56.3 | 2x2.5 | 87.4 | 278.3 | 1090 |
| 6316-5 | 63 | 16 | 65.7 | 55.9 | 2x2.5 | 147 | 462.6 | 1420 |
| 6320-2.5 | 63 | 20 | 65.7 | 55.9 | 1x2.5 | 81 | 231.3 | 740 |
| 6320-5 | 63 | 20 | 65.7 | 55.9 | 2x2.5 | 147 | 463.5 | 1420 |
| Skruvdimensioner | Skruvaxels tröghetsmoment/mm kg·㎡/mm | Skruvnuts massa kg | Skruv massa kg/m | |||||||
| Yttre diameter D | Flängdiameter D1 | Total längd L1 | H | B1 | PCD | d,xd2xh | Smörjningshål A | |||
| 102 | 144 | 81 | 18 | 63 | 122 | 11x17.5x11 | Rc1/8 (PT1/8) | 7.05x10° | 4.19 | 16.43 |
| 102 | 144 | 111 | 18 | 93 | 122 | 11x17.5x11 | 7.05x10° | 5.36 | 16.43 | |
| 102 | 144 | 141 | 18 | 123 | 122 | 11x17.5x11 | 7.05x10 | 6.54 | 16.43 | |
| 105 | 147 | 93 | 18 | 75 | 125 | 11x17.5x11 | 7.05x10° | 5.01 | 16.29 | |
| 105 | 147 | 107 | 18 | 89 | 125 | 11x17.5x11 | 7.05x10 | 5.6 | 16.29 | |
| 105 | 147 | 105 | 18 | 87 | 125 | 11x17.5x11 | 7.05x10° | 5.52 | 16.29 | |
| 105 | 147 | 129 | 18 | 111 | 125 | 11x17.5x11 | 7.05x10° | 6.54 | 16.29 | |
| 105 | 147 | 165 | 18 | 147 | 125 | 11x17.5x11 | 7.05x10 | 8.07 | 16.29 | |
| 110 | 158 | 116 | 25 | 91 | 133 | 14x20x13 | 7.05x10 | 7.4 | 15.46 | |
| 110 | 158 | 164 | 25 | 139 | 133 | 14x20x13 | 7.05x10° | 9.73 | 15.46 | |
| 112 | 158 | 127 | 28 | 99 | 134 | 14x20x13 | 7.05x10° | 8.4 | 16.1 | |
| 112 | 158 | 187 | 28 | 159 | 134 | 14x20x13 | 7.05x10° | 11.45 | 16.1 | |
| 108 | 154 | 77 | 22 | 55 | 130 | 14x20x13 | 1.21x10 | 4.57 | 21.93 | |
| 108 | 154 | 107 | 22 | 85 | 130 | 14x20x13 | 1.21x10° | 5.77 | 21.93 | |
| 108 | 154 | 137 | 22 | 115 | 130 | 14x20x13 | 1.21x10° | 6.98 | 21.93 | |
| 115 | 161 | 87 | 22 | 65 | 137 | 14x20x13 | 1.21x10° | 5.8 | 21.14 | |
| 115 | 161 | 123 | 22 | 101 | 137 | 14x20x13 | 1.21x10° | 7.56 | 21.14 | |
| 122 | 184 | 160 | 24 | 136 | 152 | 18x26x17.5 | 1.21x10° | 11.82 | 20.85 | |
| 122 | 180 | 127 | 28 | 99 | 150 | 18x26x17.5 | 1.21x10 | 10.1 | 21.57 | |
| 122 | 180 | 187 | 28 | 159 | 150 | 18x26x17.5 | 1.21x10° | 13.58 | 21.57 | |
| Modellnummer | Skruvaxels yttre diameter d | Förskjutning Ph | Boll centrums-till-centrums diameter dp | Trådmindradiameter dc | Antal laddade kretsar Rader X varv | Grundlastvärde | Styvhets K N/μm | |
| Ca KN | Cua kN | |||||||
| 7010-2.5 | 70 | 10 | 71.75 | 64.5 | 1x2.5 | 36.8 | 123.5 | 590 |
| 7010-5 | 70 | 10 | 71.75 | 64.5 | 2x2.5 | 66.9 | 247 | 1140 |
| 7010-7.5 | 70 | 10 | 71.75 | 64.5 | 3x2.5 | 94.9 | 371.4 | 1680 |
| 7012-2.5 | 70 | 12 | 72 | 64.2 | 1x2.5 | 43.5 | 139.2 | 600 |
| 7012-5 | 70 | 12 | 72 | 64.2 | 2x2.5 | 78.9 | 278.3 | 1160 |
| 7012-7.5 | 70 | 12 | 72 | 64.2 | 3x2.5 | 111.7 | 417.5 | 1710 |
| 7020-5 | 70 | 20 | 72.7 | 62.9 | 2x2.5 | 153.9 | 514.5 | 1550 |
| 8010-2.5 | 80 | 10 | 81.75 | 75.2 | 1x2.5 | 38.9 | 141.1 | 650 |
| 8010-5 | 80 | 10 | 81.75 | 75.2 | 2x2.5 | 70.6 | 283.2 | 1270 |
| 8010-7.5 | 80 | 10 | 81.75 | 75.2 | 3x2.5 | 100 | 424.3 | 1860 |
| 8020A-2.5 | 80 | 20 | 82.7 | 72.9 | 1x2.5 | 90.1 | 294 | 890 |
| 8020A-5 | 80 | 20 | 82.7 | 72.9 | 2x2.5 | 163.7 | 589 | 1720 |
| 8020A-7.5 | 80 | 20 | 82.7 | 72.9 | 3x2.5 | 231.6 | 883.2 | 2520 |
| 10020A-2.5 | 100 | 20 | 102.7 | 92.9 | 1x2.5 | 99 | 368.5 | 2110 |
| 10020A-5 | 100 | 20 | 102.7 | 92.9 | 2x2.5 | 179.3 | 737 | 4080 |
| 10020A-7.5 | 100 | 20 | 102.7 | 92.9 | 3x2.5 | 253.8 | 1105.4 | 6010 |
| Skruvdimensioner | Skruvaxels tröghetsmoment/mm kg·㎡/mm | Skruvnuts massa kg | Skruv massa kg/m | |||||||
| Yttre diameter D | Flängdiameter D1 | Total längd L1 | H | B1 | PCD | d1xd2xh | Smörjningshål A | |||
| 125 | 167 | 81 | 18 | 63 | 145 | 11x17.5x11 | Rc1/8 (PT1/8) | 1.85x10 | 5.8 | 27.4 |
| 125 | 167 | 111 | 18 | 93 | 145 | 11x17.5x11 | 1.85x10 | 7.49 | 27.4 | |
| 125 | 167 | 141 | 18 | 123 | 145 | 11x17.5x11 | 1.85x10° | 9.19 | 27.4 | |
| 128 | 170 | 93 | 18 | 75 | 148 | 11x17.5x11 | 1.85x10 | 6.89 | 27.24 | |
| 128 | 170 | 129 | 18 | 111 | 148 | 11x17.5x11 | 1.85x10 | 9.08 | 27.24 | |
| 128 | 170 | 165 | 18 | 147 | 148 | 11x17.5x11 | 1.85x10 | 11.26 | 27.24 | |
| 130 | 186 | 185 | 28 | 157 | 158 | 18x26x17.5 | 1.85x10 | 14.5 | 27 | |
| 130 | 176 | 77 | 22 | 55 | 152 | 14x20x13 | 3.16x10 | 5.9 | 36.26 | |
| 130 | 176 | 107 | 22 | 85 | 152 | 14x20x13 | 3.16x10 | 7.53 | 36.26 | |
| 130 | 176 | 137 | 22 | 115 | 152 | 14x20x13 | 3.16x10° | 9.15 | 36.26 | |
| 143 | 204 | 127 | 28 | 99 | 172 | 18x26x17.5 | 3.16x10° | 12.68 | 35.81 | |
| 143 | 204 | 187 | 28 | 159 | 172 | 18x26x17.5 | 3.16x10 | 17.12 | 35.81 | |
| 143 | 204 | 247 | 28 | 219 | 172 | 18x26x17.5 | 3.16x10 | 21.56 | 35.81 | |
| 170 | 243 | 131 | 32 | 99 | 205 | 22x32x21.5 | 7.71x10 | 18.28 | 57.13 | |
| 170 | 243 | 191 | 32 | 159 | 205 | 22x32x21.5 | 7.71x10 | 24.2 | 57.13 | |
| 170 | 243 | 251 | 32 | 219 | 205 | 22x32x21.5 | 7.71x10 | 30.12 | 57.13 | |
Prenumerera på vårt nyhetsbrev för dagliga nyheter och uppdateringar
Shanghai, Kina
YOSOmachinery
Upphovsrätt © Jingpeng Machinery&Equipment(Shanghai) Co.,Ltd Alla rättigheter förbehålls
EN
AR
BG
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RU
ES
SV
TL
ID
UK
VI
HU
TH
TR
FA
AF
MS
SW
GA
CY
BE
KA
LA
MY
TG
UZ
