Projekt zewnętrznej cyrkulacji może wytrzymać ciężkie obciążenie, wysoką prędkość i duży dopływ. Wysoka sztywność, niski poziom hałasu, cała długość wynosi do 10 metrów, długość rozsunięcia może sięgnąć do 19 metrów, nominalne obciążenie dynamiczne wynosi 126 ton, nominalne obciążenie statyczne wynosi 595 ton
| Model nr | Średnica zewnętrzna wału śrubowego d | Krok Ph | Średnica między środkami kul dp | Średnica wewnętrzna nitki dc | Liczba obwodów obciążonych Rzędy X obroty | Podstawowa klasyfikacja obciążenia | Sztywność K N/um | |
| Ca kN | Ca kN | |||||||
| :5510-2.5 | 55 | 10 | 56.75 | 49.5 | 1x2.5 | 33.4 | 97 | 490 |
| :5510-5 | 55 | 10 | 56.75 | 49.5 | 2x2.5 | 60.7 | 194 | 950 |
| :5510-7.5 | 55 | 10 | 56.75 | 49.5 | 3x2.5 | 85.9 | 291.1 | 1390 |
| 5512-2.5 | 55 | 12 | 57 | 49.2 | 1x2.5 | 39.3 | 108.8 | 500 |
| :5512-3 | 55 | 12 | 57 | 49.2 | 2x1.5 | 46 | 131.3 | 590 |
| 5512-3.5 | 55 | 12 | 57 | 49.2 | 1x3.5 | 52.4 | 152.9 | 680 |
| :5512-5 | 55 | 12 | 57 | 49.2 | 2x2.5 | 71.3 | 218.5 | 960 |
| 5512-7.5 | 55 | 12 | 57 | 49.2 | 3x2.5 | 100.9 | 327.3 | 1420 |
| 5516-2.5 | 55 | 16 | 57.7 | 47.9 | 1x2.5 | 76.1 | 201.9 | 650 |
| 5516-5 | 55 | 16 | 57.7 | 47.9 | 2x2.5 | 138.2 | 402.8 | 1280 |
| 5520-2.5 | 55 | 20 | 57.7 | 47.9 | 1x2.5 | 76 | 201.9 | 660 |
| 5520-5 | 55 | 20 | 57.7 | 47.9 | 2x2.5 | 138.2 | 403.8 | 1280 |
| 6310-2.5 | 63 | 10 | 64.75 | 57.7 | 1x2.5 | 35.4 | 111.7 | 550 |
| 6310-5 | 63 | 10 | 64.75 | 57.7 | 2x2.5 | 64.2 | 222.5 | 1050 |
| :6310-7.5 | 63 | 10 | 64.75 | 57.7 | 3x2.5 | 90.9 | 334.2 | 1550 |
| 6312A-2.5 | 63 | 12 | 65.25 | 56.3 | 1x2.5 | 48.1 | 139.2 | 560 |
| :6312A-5 | 63 | 12 | 65.25 | 56.3 | 2x2.5 | 87.4 | 278.3 | 1090 |
| 6316-5 | 63 | 16 | 65.7 | 55.9 | 2x2.5 | 147 | 462.6 | 1420 |
| 6320-2.5 | 63 | 20 | 65.7 | 55.9 | 1x2.5 | 81 | 231.3 | 740 |
| 6320-5 | 63 | 20 | 65.7 | 55.9 | 2x2.5 | 147 | 463.5 | 1420 |
| Wymiary nakrętki | Moment bezwładności śruby mm kg·㎡/mm | Masa nakrętki kg | Masa wału kg/m | |||||||
| Średnica zewnętrzna D | Średnica flangi D1 | Długość ogólna L1 | H | B1 | PCD | d,xd2xh | Otwór smarujący A | |||
| 102 | 144 | 81 | 18 | 63 | 122 | 11x17.5x11 | Rc1/8 (PT1/8) | 7.05x10° | 4.19 | 16.43 |
| 102 | 144 | 111 | 18 | 93 | 122 | 11x17.5x11 | 7.05x10° | 5.36 | 16.43 | |
| 102 | 144 | 141 | 18 | 123 | 122 | 11x17.5x11 | 7.05x10 | 6.54 | 16.43 | |
| 105 | 147 | 93 | 18 | 75 | 125 | 11x17.5x11 | 7.05x10° | 5.01 | 16.29 | |
| 105 | 147 | 107 | 18 | 89 | 125 | 11x17.5x11 | 7.05x10 | 5.6 | 16.29 | |
| 105 | 147 | 105 | 18 | 87 | 125 | 11x17.5x11 | 7.05x10° | 5.52 | 16.29 | |
| 105 | 147 | 129 | 18 | 111 | 125 | 11x17.5x11 | 7.05x10° | 6.54 | 16.29 | |
| 105 | 147 | 165 | 18 | 147 | 125 | 11x17.5x11 | 7.05x10 | 8.07 | 16.29 | |
| 110 | 158 | 116 | 25 | 91 | 133 | 14x20x13 | 7.05x10 | 7.4 | 15.46 | |
| 110 | 158 | 164 | 25 | 139 | 133 | 14x20x13 | 7.05x10° | 9.73 | 15.46 | |
| 112 | 158 | 127 | 28 | 99 | 134 | 14x20x13 | 7.05x10° | 8.4 | 16.1 | |
| 112 | 158 | 187 | 28 | 159 | 134 | 14x20x13 | 7.05x10° | 11.45 | 16.1 | |
| 108 | 154 | 77 | 22 | 55 | 130 | 14x20x13 | 1.21x10 | 4.57 | 21.93 | |
| 108 | 154 | 107 | 22 | 85 | 130 | 14x20x13 | 1,21x10° | 5.77 | 21.93 | |
| 108 | 154 | 137 | 22 | 115 | 130 | 14x20x13 | 1,21x10° | 6.98 | 21.93 | |
| 115 | 161 | 87 | 22 | 65 | 137 | 14x20x13 | 1,21x10° | 5.8 | 21.14 | |
| 115 | 161 | 123 | 22 | 101 | 137 | 14x20x13 | 1,21x10° | 7.56 | 21.14 | |
| 122 | 184 | 160 | 24 | 136 | 152 | 18x26x17,5 | 1,21x10° | 11.82 | 20.85 | |
| 122 | 180 | 127 | 28 | 99 | 150 | 18x26x17,5 | 1.21x10 | 10.1 | 21.57 | |
| 122 | 180 | 187 | 28 | 159 | 150 | 18x26x17,5 | 1,21x10° | 13.58 | 21.57 | |
| Model nr | Średnica zewnętrzna wału śrubowego d | Krok Ph | Średnica między środkami kul dp | Średnica wewnętrzna nitki dc | Liczba obwodów obciążonych Rzędy X obroty | Podstawowa klasyfikacja obciążenia | Sztywność K N/μm | |
| Ca kN | Cua KN | |||||||
| 7010-2,5 | 70 | 10 | 71.75 | 64.5 | 1x2.5 | 36.8 | 123.5 | 590 |
| 7010-5 | 70 | 10 | 71.75 | 64.5 | 2x2.5 | 66.9 | 247 | 1140 |
| 7010-7,5 | 70 | 10 | 71.75 | 64.5 | 3x2.5 | 94.9 | 371.4 | 1680 |
| 7012-2,5 | 70 | 12 | 72 | 64.2 | 1x2.5 | 43.5 | 139.2 | 600 |
| 7012-5 | 70 | 12 | 72 | 64.2 | 2x2.5 | 78.9 | 278.3 | 1160 |
| 7012-7.5 | 70 | 12 | 72 | 64.2 | 3x2.5 | 111.7 | 417.5 | 1710 |
| 7020-5 | 70 | 20 | 72.7 | 62.9 | 2x2.5 | 153.9 | 514.5 | 1550 |
| 8010-2.5 | 80 | 10 | 81.75 | 75.2 | 1x2.5 | 38.9 | 141.1 | 650 |
| 8010-5 | 80 | 10 | 81.75 | 75.2 | 2x2.5 | 70.6 | 283.2 | 1270 |
| 8010-7.5 | 80 | 10 | 81.75 | 75.2 | 3x2.5 | 100 | 424.3 | 1860 |
| 8020A-2.5 | 80 | 20 | 82.7 | 72.9 | 1x2.5 | 90.1 | 294 | 890 |
| 8020A-5 | 80 | 20 | 82.7 | 72.9 | 2x2.5 | 163.7 | 589 | 1720 |
| 8020A-7.5 | 80 | 20 | 82.7 | 72.9 | 3x2.5 | 231.6 | 883.2 | 2520 |
| 10020A-2.5 | 100 | 20 | 102.7 | 92.9 | 1x2.5 | 99 | 368.5 | 2110 |
| 10020A-5 | 100 | 20 | 102.7 | 92.9 | 2x2.5 | 179.3 | 737 | 4080 |
| 10020A-7.5 | 100 | 20 | 102.7 | 92.9 | 3x2.5 | 253.8 | 1105.4 | 6010 |
| Wymiary nakrętki | Moment bezwładności śruby mm kg·㎡/mm | Masa nakrętki kg | Masa wału kg/m | |||||||
| Średnica zewnętrzna D | Średnica flangi D1 | Długość ogólna L1 | H | B1 | PCD | d1xd2xh | Otwór smarujący A | |||
| 125 | 167 | 81 | 18 | 63 | 145 | 11x17.5x11 | Rc1/8 (PT1/8) | 1.85x10 | 5.8 | 27.4 |
| 125 | 167 | 111 | 18 | 93 | 145 | 11x17.5x11 | 1.85x10 | 7.49 | 27.4 | |
| 125 | 167 | 141 | 18 | 123 | 145 | 11x17.5x11 | 1.85x10° | 9.19 | 27.4 | |
| 128 | 170 | 93 | 18 | 75 | 148 | 11x17.5x11 | 1.85x10 | 6.89 | 27.24 | |
| 128 | 170 | 129 | 18 | 111 | 148 | 11x17.5x11 | 1.85x10 | 9.08 | 27.24 | |
| 128 | 170 | 165 | 18 | 147 | 148 | 11x17.5x11 | 1.85x10 | 11.26 | 27.24 | |
| 130 | 186 | 185 | 28 | 157 | 158 | 18x26x17,5 | 1.85x10 | 14.5 | 27 | |
| 130 | 176 | 77 | 22 | 55 | 152 | 14x20x13 | 3.16x10 | 5.9 | 36.26 | |
| 130 | 176 | 107 | 22 | 85 | 152 | 14x20x13 | 3.16x10 | 7.53 | 36.26 | |
| 130 | 176 | 137 | 22 | 115 | 152 | 14x20x13 | 3.16x10° | 9.15 | 36.26 | |
| 143 | 204 | 127 | 28 | 99 | 172 | 18x26x17,5 | 3.16x10° | 12.68 | 35.81 | |
| 143 | 204 | 187 | 28 | 159 | 172 | 18x26x17,5 | 3.16x10 | 17.12 | 35.81 | |
| 143 | 204 | 247 | 28 | 219 | 172 | 18x26x17,5 | 3.16x10 | 21.56 | 35.81 | |
| 170 | 243 | 131 | 32 | 99 | 205 | 22x32x21.5 | 7.71x10 | 18.28 | 57.13 | |
| 170 | 243 | 191 | 32 | 159 | 205 | 22x32x21.5 | 7.71x10 | 24.2 | 57.13 | |
| 170 | 243 | 251 | 32 | 219 | 205 | 22x32x21.5 | 7.71x10 | 30.12 | 57.13 | |
Zapisz się do naszego newslettera, aby codziennie otrzymywać nowe informacje i aktualizacje
Shanghai, China
YOSOmachinery
Copyright © Jingpeng Machinery&Equipment(Shanghai) Co.,Ltd All Rights Reserved
EN
AR
BG
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RU
ES
SV
TL
ID
UK
VI
HU
TH
TR
FA
AF
MS
SW
GA
CY
BE
KA
LA
MY
TG
UZ
