Externe circulatieontwerp kan zware belasting, hoge snelheid en hoge voeding verdragen. Hoge starheid, lage geluidsniveau, de totale lengte bedraagt tot 10 meter, de uitstreklengte kan tot 19 meter bedragen, de nominale dynamische belasting is 126 ton, de nominale statische belasting is 595 ton
| Model NO. | Buitendiameter schroefas d | Stap Ph | Balldiameter van midden tot midden dp | Draad kleinste diameter dc | Aantal belaste circuits Rijen X windingen | Basisbelasting | Startheid K N/um | |
| Ca kN | Coa kN | |||||||
| 1605V-5 | 16 | 5 | 16.75 | 13.2 | 2x2.5 | 13.5 | 27.9 | 640 |
| 2805V-7.5 | 28 | 5 | 28.75 | 25.2 | 3x2.5 | 24.8 | 73.8 | 1470 |
| 2806V-7.5 | 28 | 6 | 28.75 | 25.2 | 3x2.5 | 24.8 | 73.8 | 1470 |
| 3205V-7.5 | 32 | 5 | 32.75 | 29.2 | 3x2.5 | 26.2 | 84.4 | 1640 |
| Model NO. | Buitendiameter schroefas d | Stap Ph | Balldiameter van midden tot midden dp | Draad kleinste diameter dc | Aantal belaste circuits Rijen X windingen | Basisbelasting | Startheid K N/um | |
| Ca kN | Coa kN | |||||||
| 2810V-2.5 | 28 | 10 | 29.75 | 22.4 | 1x2.5 | 24.3 | 49 | 560 |
| 3610V-7.5 | 36 | 10 | 37.75 | 30.5 | 3x2.5 | 71 | 189.8 | 1990 |
| 3616V-5 | 36 | 16 | 38 | 30.1 | 2x2.5 | 58.3 | 142.9 | 1380 |
| 4016V-5 | 40 | 16 | 42 | 34.1 | 2x2.5 | 61.5 | 158.8 | 1500 |
| 4510V-7.5 | 45 | 10 | 46.75 | 39.5 | 3x2.5 | 78.8 | 237.8 | 2370 |
| 5010V-7.5 | 50 | 10 | 51.75 | 44.4 | 3x2.5 | 82.5 | 264.4 | 2580 |
| Moer afmetingen | As inertiemoment/mm kg·m/mm | Moermassa kg | Asmassa kg/m | Maximale toegestane draaisnelheid min1 | |||||||
| Buitendiameter D | Flangediameter D: | Geheelengte L | H | B1 | PCD | diXd2xh | Lubricatiegat A | ||||
| 40 | 60 | 106 | 10 | 96 | 50 | 4.5x8x4.5 | M6 | 5.05x10 | 0.88 | 1.37 | 5000 |
| 55 | 85 | 134 | 12 | 122 | 69 | 6.6x11x6.5 | 4.74x107 | 1.88 | 4.45 | 3470 | |
| 55 | 85 | 158 | 12 | 149 | 69 | 6.6x11x6.5 | 4,74x10 | 2.16 | 4.52 | 3470 | |
| 58 | 85 | 136 | 12 | 124 | 71 | 6.6x11x6.5 | 8,08x10 | 1.93 | 5.89 | 3050 | |
| Moer afmetingen | As inertiemoment/mm kg·m/mm | Moermassa kg | Asmassa kg/m | Maximale toegestane draaisnelheid min1 | |||||||
| Buitendiameter D | Flanjdiameter D1 | Totale lengte L1 | H | B1 | PCD | d,xd2xh | Lubricatiegat A | ||||
| 65 | 106 | 146 | 18 | 128 | 85 | 11x17,5x11 | M6 | 4,74x10 | 3.41 | 4.15 | 4360 |
| 75 | 120 | 261 | 18 | 243 | 98 | 11x17,5x11 | 1,29x10 | 6.93 | 7.1 | 3440 | |
| 78 | 123 | 268 | 18 | 250 | 100 | 11x17,5x11 | 1,29x10 | 7.8 | 7.99 | 3420 | |
| 84 | 126 | 280 | 22 | 258 | 104 | 11x17,5x11 | 1,97x10 | 9.27 | 9.09 | 3090 | |
| 88 | 132 | 261 | 18 | 243 | 110 | 11x17,5x11 | Rc1/8 (PT1/8) | 3,16x10 | 8.92 | 11.36 | 2780 |
| 93 | 135 | 253 | 18 | 235 | 113 | 11x17,5x11 | 4,82x10 | 9.19 | 14.16 | 2510 | |
| Model NO. | Buitendiameter schroefas d | Stap Ph | Balldiameter van midden tot midden dp | Draad kleinste diameter dc | Aantal belaste circuits Rijen X windingen | Basisbelasting | Stijfheid K N/μm | |
| Ca kN | Coa kN | |||||||
| 15510-2,5 | 55 | 10 | 56.75 | 49.5 | 1x2.5 | 33.4 | 97 | 970 |
| 15510-5 | 55 | 10 | 56.75 | 49.5 | 2x2.5 | 60.7 | 194 | 1890 |
| 15510-7,5 | 55 | 10 | 56.75 | 49.5 | 3x2.5 | 85.9 | 291.1 | 2770 |
| 5512-2,5 | 55 | 12 | 57 | 49.2 | 1x2.5 | 39.3 | 108.8 | 990 |
| 15512-3 | 55 | 12 | 57 | 49.2 | 2x1,5 | 46 | 131.3 | 1180 |
| 5512-3,5 | 55 | 12 | 57 | 49.2 | 1x3.5 | 52.4 | 152.9 | 1360 |
| 15512-5 | 55 | 12 | 57 | 49.2 | 2x2.5 | 71.3 | 218.5 | 1920 |
| 15512-7,5 | 55 | 12 | 57 | 49.2 | 3x2.5 | 100.9 | 327.3 | 2830 |
| 15516-2,5 | 55 | 16 | 57.7 | 47.9 | 1x2.5 | 76.1 | 201.9 | 1310 |
| 5516-5 | 55 | 16 | 57.7 | 47.9 | 2x2.5 | 138.2 | 402.8 | 2550 |
| 5520-2,5 | 55 | 20 | 57.7 | 47.9 | 1x2.5 | 76 | 201.9 | 1320 |
| 5520-5 | 55 | 20 | 57.7 | 47.9 | 2x2.5 | 138.2 | 403.8 | 2550 |
| 16310-2,5 | 63 | 10 | 64.75 | 57.7 | 1x2.5 | 35.4 | 111.7 | 1090 |
| 16310-5 | 63 | 10 | 64.75 | 57.7 | 2x2.5 | 64.2 | 222.5 | 2100 |
| 16310-7,5 | 63 | 10 | 64.75 | 57.7 | 3x2.5 | 90.9 | 334.2 | 3090 |
| 6312A-2.5 | 63 | 12 | 65.25 | 56.3 | 1x2.5 | 48.1 | 139.2 | 1120 |
| 16312A-5 | 63 | 12 | 65.25 | 56.3 | 2x2.5 | 87.4 | 278.3 | 2160 |
| 16316-2.5 | 63 | 16 | 65.7 | 55.9 | 1x2.5 | 81.1 | 231.3 | 1470 |
| 16316-5 | 63 | 16 | 65.7 | 55.9 | 2x2.5 | 147 | 462.6 | 2840 |
| 16320-2.5 | 63 | 20 | 65.7 | 55.9 | 1x2.5 | 81 | 231.3 | 1470 |
| 16320-5 | 63 | 20 | 65.7 | 55.9 | 2x2.5 | 147 | 463.5 | 2640 |
| Moer afmetingen | Schroefas traagheidsmoment/mm kg·㎡/mm | Moermassa kg | Asmassa kg/m | |||||||
| Buitendiameter D | Flanjdiameter D1 | Totale lengte L1 | H | B1 | PCD | d1xd2xh | Lubricatiegat A | |||
| 102 | 144 | 141 | 18 | 123 | 122 | 11x17,5x11 | Rc1/8 (PT1/8) | 7.05x10 | 6.54 | 16.43 |
| 102 | 144 | 201 | 18 | 183 | 122 | 11x17,5x11 | 7.05x10 | 8.88 | 16.43 | |
| 102 | 144 | 261 | 18 | 243 | 122 | 11x17,5x11 | 7.05x10° | 11.23 | 16.43 | |
| 105 | 147 | 165 | 18 | 147 | 125 | 11x17,5x11 | 7.05x10 | 8.07 | 16.29 | |
| 105 | 147 | 191 | 18 | 173 | 125 | 11x17,5x11 | 7.05x10 | 9.17 | 16.29 | |
| 105 | 147 | 189 | 18 | 171 | 125 | 11x17,5x11 | 7.05x10 | 9.09 | 16.29 | |
| 105 | 147 | 237 | 18 | 219 | 125 | 11x17,5x11 | 7.05x10 | 11.13 | 16.29 | |
| 105 | 147 | 309 | 18 | 291 | 125 | 11x17,5x11 | 7.05x10 | 14.19 | 16.29 | |
| 110 | 158 | 196 | 25 | 171 | 133 | 14x20x13 | 7.05x10 | 11.28 | 15.46 | |
| 110 | 158 | 292 | 25 | 267 | 133 | 14x20x13 | 7.05x10 | 15.94 | 15.46 | |
| 112 | 158 | 227 | 28 | 199 | 134 | 14x20x13 | 7.05x10 | 13.49 | 16.1 | |
| 112 | 158 | 347 | 28 | 319 | 134 | 14x20x13 | 7.05x10 | 19.61 | 16.1 | |
| 108 | 154 | 137 | 22 | 115 | 130 | 14x20x13 | 1.21x10 | 6.98 | 21.93 | |
| 108 | 154 | 197 | 22 | 175 | 130 | 14x20x13 | 1.21x10 | 9.4 | 21.93 | |
| 108 | 154 | 257 | 22 | 235 | 130 | 14x20x13 | 1.21x10 | 11.81 | 21.93 | |
| 115 | 161 | 159 | 22 | 137 | 137 | 14x20x13 | 1.21x10 | 9.32 | 21.14 | |
| 115 | 161 | 231 | 22 | 209 | 137 | 14x20x13 | 1.21x10 | 12.84 | 21.14 | |
| 122 | 184 | 208 | 24 | 184 | 152 | 18x26x17,5 | 1.21x10 | 14.61 | 20.85 | |
| 122 | 184 | 304 | 24 | 280 | 152 | 18x26x17,5 | 1.21x10 | 20.19 | 20.85 | |
| 122 | 180 | 227 | 28 | 199 | 150 | 18x26x17,5 | 1.21x10 | 15.91 | 20.85 | |
| 122 | 180 | 347 | 28 | 319 | 150 | 18x26x17,5 | 1.21x10 | 22.88 | 20.85 | |
| Model NO. | Buitendiameter schroefas d | Stap Ph | Balldiameter van midden tot midden dp | Draad kleinste diameter dc | Aantal geladen circuits Rijen X keren | Basisbelasting | Startheid K N/um | |
| Ca kN | Cua KN | |||||||
| 7010-2.5 | 70 | 10 | 71.75 | 64.5 | 1x2.5 | 36.8 | 123.5 | 1180 |
| 7010-5 | 70 | 10 | 71.75 | 64.5 | 2x2.5 | 66.9 | 247 | 2280 |
| 7010-7.5 | 70 | 10 | 71.75 | 64.5 | 3x2.5 | 94.9 | 371.4 | 3350 |
| 7012-2.5 | 70 | 12 | 72 | 64.2 | 1x2.5 | 43.5 | 139.2 | 1200 |
| 7012-5 | 70 | 12 | 72 | 64.2 | 2x2.5 | 78.9 | 278.3 | 2320 |
| 7012-7.5 | 70 | 12 | 72 | 64.2 | 3x2.5 | 111.7 | 417.5 | 3420 |
| 7020-5 | 70 | 20 | 72.7 | 62.9 | 2x2.5 | 153.9 | 514.5 | 3090 |
| 8010-2,5 | 80 | 10 | 81.75 | 75.2 | 1x2.5 | 38.9 | 141.1 | 1300 |
| 8010-5 | 80 | 10 | 81.75 | 75.2 | 2x2.5 | 70.6 | 283.2 | 2530 |
| 8010-7,5 | 80 | 10 | 81.75 | 75.2 | 3x2.5 | 100 | 424.3 | 3720 |
| 8012-5 | 80 | 12 | 82.3 | 74.1 | 2x2.5 | 96.5 | 353.8 | 2620 |
| 8020A-2,5 | 80 | 20 | 82.7 | 72.9 | 1x2.5 | 90.1 | 294 | 1770 |
| 8020A-5 | 80 | 20 | 82.7 | 72.9 | 2x2.5 | 163.7 | 589 | 3430 |
| 10020A-2,5 | 100 | 20 | 102.7 | 92.9 | 1x2.5 | 99 | 368.5 | 2110 |
| 10020A-5 | 100 | 20 | 102.7 | 92.9 | 2x2.5 | 179.3 | 737 | 4080 |
| 10020A-7,5 | 100 | 20 | 102.7 | 92.9 | 3x2.5 | 253.8 | 1105.4 | 6010 |
Abonneer u op onze nieuwsbrief voor dagelijks nieuws en updates
Shanghai, China
YOSOmachinery
Copyright © Jingpeng Machinery&Equipment(Shanghai) Co.,Ltd All Rights Reserved
EN
AR
BG
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RU
ES
SV
TL
ID
UK
VI
HU
TH
TR
FA
AF
MS
SW
GA
CY
BE
KA
LA
MY
TG
UZ
