Hohe Steifigkeit, hohe Präzision, hohe Tragfähigkeit in vier Richtungen und Konstruktion mit hoher Drehmomentwiderstand
| Nennwertmodell | Blocktyp | Montagehöhe | Abmessung | ||||
| P | G: Standard | R: Niedrige Montage | 15, 20, 25, 30, 35, 45, 55, 65 | ||||
| S:Niedrige Montage | L:Mittlerer-Bereich | ||||||
| H: Hohe Montage | |||||||
| Flanschtyp | Länge des Blocks | Anzahl der Blöcke pro Schiene | Zubehörcode | ||||
| C:Mit Flansch | N:Normal | EX:2 | o:Standard (Siehe dazu Seite A26) | ||||
| L:Länglich | |||||||
| Länge des Schienen | Genauigkeitsklasse | Vorspannung | Zwei Sätze pro Achse | Schienen-Spezialbearbeitung | |||
| Einheit: mm | N:Normal | ZF:Leichter Spielraum | Ii) | U:Gewindestangen-Schiene | |||
| H:Hoch | ZO:Keine Vorspannung | E:Schiene mit Spezialbearbeitung | |||||
| P:Präzision | Z1:Leichte Vorspannung | ||||||
| SP:Super-Präzision | Z2:Mittlerer Vorspann | ||||||
| UP:Ultra-Präzision | |||||||
| Oberflächenbehandlung des Blocks | Oberflächenbehandlung der Schiene | ||||||
| S:Standard | S:Standard | ||||||
| B1:Schwarze Oxidation | B1:Schwarze Oxidation | ||||||
| N1:Hartchromüberzug | N1:Hartchromüberzug | ||||||
| P:Phosphatisierung | P:Phosphatisierung | ||||||
| N3:Nickelüberzug | N3:Nickelüberzug | ||||||
| N4:Raydent | N4:Raydent | ||||||
| N5:Chromüberzug | N5:Chromüberzug | ||||||
| Modell-Nr. | komponentengröße (mm) | schiebergröße (mm) | schienengröße (mm) | größe der Befestigungsschrauben für die Schiene | grundlegende dynamische Lastkapazität | grundlast bei statischer Beanspruchung | zulässiges statisches Moment | gewicht | |||||||||||||||||||||||
| schieber kg | schienen kg/m | ||||||||||||||||||||||||||||||
| H | H1 | N | W | B | B1 | C | L | L | K | K | G | Mxl | T | H2 | H3 | WR | H2 | D | h | d | P | E | (mm) | C(kN) | Co(kN) | MR KN-m | MP KN-m | MY KN-m | |||
| PGH15R | 28 | 4.3 | 9.5 | 34 | 26 | 4 | 26 | 39.4 | 61.4 | 10 | 4.85 | 5.3 | M4x5 | 6 | 8.5 | 9.5 | 15 | 16.3 | 7.5 | 5.3 | 4.5 | 60 | 20 | M4x16 | 11.76 | 19.21 | 0.12 | 0.10 | 0.10 | 0.18 | 1.45 |
| PGH20R | 30 | 4.6 | 12 | 44 | 32 | 6 | 36 | 50.5 | 77.5 | 12.25 | 6 | 12 | M5x6 | 8 | 6 | 7 | 20 | 18.9 | 9.5 | 8.8 | 6 | 60 | 20 | M5x16 | 18.48 | 28.63 | 0.27 | 0.20 | 0.20 | 0.30 | 2.21 |
| PGH20LR | 50 | 65.2 | 92.2 | 12.6 | 22.24 | 37.60 | 0.35 | 0.35 | 0.35 | 0.39 | |||||||||||||||||||||
| PGH25R | 40 | 5.5 | 12.5 | 48 | 35 | 6.5 | 35 | 58 | 84 | 16.8 | 6 | 12 | M6X8 | 8 | 10 | 13 | 23 | 23.45 | 11 | 9.2 | 7 | 60 | 20 | M6x20 | 27.29 | 39.45 | 0.42 | 0.33 | 0.33 | 0.51 | 3.21 |
| PGH25LR | 50 | 78.6 | 104.6 | 19.6 | 33.58 | 53.02 | 0.56 | 0.57 | 0.57 | 0.69 | |||||||||||||||||||||
| PGH30R | 45 | 6 | 16 | 60 | 40 | 10 | 40 | 70 | 97.4 | 20.25 | 6 | 12 | M8x10 | 8.5 | 9.5 | 13.8 | 28 | 27.4 | 14 | 12.6 | 9 | 80 | 20 | M8x25 | 38.97 | 55.00 | 0.66 | 0.53 | 0.53 | 0.88 | 4.47 |
| PGH30LRR | 60 | 93 | 120.4 | 21.75 | 47.59 | 73.08 | 0.88 | 0.92 | 0.92 | 1.16 | |||||||||||||||||||||
| PGH35R | 55 | 7.5 | 18 | 70 | 50 | 10 | 50 | 80 | 112.4 | 20.6 | 7 | 12 | M8X12 | 10.2 | 16 | 19.6 | 34 | 30.4 | 14 | 12.6 | 9 | 80 | 20 | M8x25 | 50.76 | 72.33 | 1.16 | 0.81 | 0.81 | 1.45 | 6.30 |
| PGH35LR | 72 | 105.8 | 138.2 | 22.5 | 61.91 | 96.12 | 1.54 | 1.40 | 1.40 | 1.92 | |||||||||||||||||||||
| PGH45R | 70 | 9.5 | 20.5 | 86 | 60 | 13 | 60 | 97 | 139.4 | 23 | 10 | 12.9 | M10X17 | 16 | 18.5 | 30.5 | 45 | 39.3 | 20 | 17 | 14 | 105 | 22.5 | M12X35 | 80.69 | 110.31 | 1.98 | 1.55 | 1.55 | 2.73 | 10.41 |
| PGH45LR | 80 | 128.8 | 171.2 | 28.9 | 98.47 | 146.88 | 2.63 | 2.68 | 2.68 | 3.61 | |||||||||||||||||||||
| Modell-Nr. | komponentengröße (mm) | schiebergröße (mm) | schienengröße (mm) | abmessungen der Schienenbefestigungsschrauben | grundlegende dynamische Lastkapazität | grundlast bei statischer Beanspruchung | zulässiges statisches Moment | gewicht | |||||||||||||||||||||||||
| schieber kg | schienen kg/m | ||||||||||||||||||||||||||||||||
| H | H1 | N | W | B | B | C | L1 | L | K1 | K2 | G | M | T | T1 | T2 | H2 | H3 | W.A. | Personalwesen | D | h | d | p | E | (mm) | CKN) | Co(kN) | MR KN-m | MP KN-m | MY KN-m | |||
| PGH15C | 24 | 4.3 | 16 | 47 | 38 | 4.5 | 30 | 39.4 | 61.4 | 8 | 4.85 | 5.3 | M5 | 6 | 8.9 | 6.95 | 4.5 | 5.5 | 15 | 16.3 | 7.5 | 5.3 | 4.5 | 60 | 20 | M4x16 | 11.76 | 19.21 | 0.12 | 0.10 | 0.10 | 0.17 | 1.45 |
| PGH20C | 30 | 4.6 | 21 | 63 | 53 | 5 | 40 | 50.5 | 77.5 | 10.25 | 6 | 12 | M6 | 8 | 10 | 9.5 | 6 | 7 | 20 | 18.9 | 9.5 | 8.8 | 6 | 60 | 20 | M5x16 | 18.48 | 28.63 | 0.27 | 0.20 | 0.20 | 0.40 | 221 |
| PGH20LC | 65.2 | 92.2 | 17.6 | 22.24 | 37.60 | 0.35 | 0.35 | 0.35 | 0.52 | ||||||||||||||||||||||||
| PGH25C | 36 | 5.5 | 23.5 | 70 | 57 | 6.5 | 45 | 58 | 84 | 10.7 | 6 | 12 | M8 | 8 | 14 | 10 | 6 | 9 | 23 | 23.45 | 11 | 9.2 | 7 | 60 | 20 | M6x20 | 27.29 | 39.45 | 0.42 | 0.33 | 0.33 | 0.59 | 3.21 |
| PGH25LC | 78.6 | 104.6 | 21 | 33.58 | 53.02 | 0.56 | 0.57 | 0.57 | 0.80 | ||||||||||||||||||||||||
| PGH30C | 42 | 6 | 31 | 90 | 72 | 9 | 52 | 70 | 97.4 | 14.25 | 6 | 12 | M10 | 8.5 | 16 | 10 | 6.5 | 10.8 | 28 | 27.4 | 14 | 12.6 | 9 | 80 | 20 | M8x25 | 38.97 | 55.00 | 0.66 | 0.53 | 0.53 | 1.09 | 4.47 |
| PGH30LC | 93 | 120.4 | 25.75 | 47.59 | 73.08 | 0.88 | 0.92 | 0.92 | 1.44 | ||||||||||||||||||||||||
| PGH35C | 48 | 7.5 | 33 | 100 | 82 | 9 | 62 | 80 | 112.4 | 14.6 | 7 | 12 | M10 | 10.1 | 18 | 13 | 9 | 12.6 | 34 | 30.4 | 14 | 12.6 | 9 | 80 | 20 | M8x25 | 50.76 | 72.33 | 1.16 | 0.81 | 0.81 | 1.56 | 6.30 |
| PGH35LC | 105.8 | 138.2 | 27.5 | 61.91 | 96.12 | 1.54 | 1.40 | 1.40 | 2.06 | ||||||||||||||||||||||||
| PGH45C | 60 | 9.5 | 37.5 | 120 | 100 | 10 | 80 | 97 | 139.4 | 13 | 10 | 12.9 | M12 | 15.1 | 22 | 15 | 8.5 | 20.5 | 45 | 39.3 | 20 | 17 | 14 | 105 | 225 | M12X35 | 80.69 | 110.31 | 1.98 | 1.55 | 1.55 | 2.79 | 10.41 |
| PGH45LC | 128.8 | 171.2 | 28.9 | 98.47 | 146.88 | 2.63 | 2.68 | 2.68 | 3.69 | ||||||||||||||||||||||||
Abonnieren Sie unseren Newsletter für tägliche Neuigkeiten und Updates
Shanghai, China
YOSOmachinery
Copyright © Jingpeng Machinery&Equipment(Shanghai) Co.,Ltd All Rights Reserved
EN
AR
BG
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RU
ES
SV
TL
ID
UK
VI
HU
TH
TR
FA
AF
MS
SW
GA
CY
BE
KA
LA
MY
TG
UZ
