Deur die roltype lynkontakmetode word die dienslewen van die gidsrail verleng. Ultra-hoog startheid kan presisie en belasting drasties verbeter.
Die YGG-reeks lynweë word in nie-verwisselbare en verwisselbare tipes gegroepeer. Die groottes van hierdie twee tipes is dieselfde as mekaar. Die hoofverskil is dat die blokke en spore van die verwisselbare tipe vrylik uitgewissel kan word en hulle P-klas akkuraatheid kan behou. As gevolg van streng dimensionele beheer, is die verwisselbare tipe lynweë 'n wyse keuse vir kliënte wanneer spore nie per as gelyk hoef te word nie. Die modelnommer van die YGG-reeks identifiseer die grootte, tipe, akkuraatklas, voorspoelklas, ens.
Nie-verwisselbaar Tipe kode:
| Nominaal Model | Blok tipe | Hoogte van Montage Tipe | Dimensie | |
| Y | G:Standaard | R:Laag-Montage | 15,20,25,30,35,45,55,65 | |
| L: Middeste-Montage | ||||
| H:Hoog-Samestelling | ||||
| Flens Tipe | Lengte van Blok Nommer van Blok Per Spoor | Behang Kode | ||
| C:Met Flens | N:Normaal | EX:2 | Standaard (Verwys asseblief na bladsy A26) | |
| R:Vierkantig | L:Lank | |||
| Lengte van Rail | Naukeurigheidsgraad | Voorbelading | Twee Sette per As | Spesiale Bewerking van Rail |
| Eenheid:mm | N:Normaal | ZF:Klein Speling | II | U:Gevit-Rail |
| H:Hoog | ZO:Geen Voorbelading | E:Spoor met Spesiale Maching | ||
| P:Nauwkeurigheid | Z1:Ligte Voorbelading | |||
| SP:Super-Nauwkeurigheid | Z2:Gemiddelde Voorbelading | |||
| UP:Ultra-Nauwkeurigheid | Z3:Swaar Voorspanning | |||
| Blokoppervlakbehandeling | Spooroppervlakbehandeling | |||
| S:Standaard | S:Standaard | |||
| B1:Swart Oksidasie | B1:Swart Oksidasie | |||
| N1: Harde Krom Vermaking | N1:Hard Chrome Bedekking | |||
| P:Fosfaatbehandeling | P:Fosfaatbehandeling | |||
| N3:Nikel Bedekking | N3:Nikel Bedekking | |||
| N4:Raydent | N4:Raydent | |||
| N5:Chrome Bedekking | NS:Chroombedekking | |||
| Model | Komponent | Gleufafmetings | Vetkruis Spesifikasie | ||||||||||||||
| H | H1 | N | W | B | B1 | C | L1 | L | K1 | K2 | G | MXL | T | H2 | H3 | ||
| YGG20R | 34 | 5 | 12 | 44 | 32 | 6 | 36 | 57.5 | 86 | 15.8 | 6 | 5.3 | M5XB | 8 | 8.3 | 8.3 | G-M6 |
| YGG20LR | 50 | 77.5 | 106 | 18.8 | |||||||||||||
| YGG25R | 40 | 5.5 | 12.5 | 48 | 35 | 6.5 | 35 | 64.5 | 97.9 | 20.75 | 7.25 | 12 | M6x8 | 9.5 | 10.2 | 10 | G-M6 |
| YGG25LR | 50 | 81 | 114.4 | 21.5 | |||||||||||||
| YGG30R | 45 | 6 | 16 | 60 | 40 | 10 | 40 | 71 | 109.8 | 23.5 | 8 | 12 | MBX10 | 9.5 | 9.5 | 10.3 | G-M6 |
| YGG30LR | 60 | 93 | 131.8 | 24.5 | |||||||||||||
| YGG35R | 55 | 6.5 | 18 | 70 | 50 | 10 | 50 | 79 | 124 | 22.5 | 10 | 12 | MBX12 | 12 | 16 | 19.6 | G-M6 |
| YGG35LR | 72 | 106.5 | 151.5 | 25.5 | |||||||||||||
| YGG45R | 70 | 8 | 20.5 | 86 | 60 | 13 | 60 | 106 | 153.2 | 31 | 10 | 12.9 | M10X17 | 16 | 20 | 24 | G-PT1/8 |
| YGG45LR | 80 | 139.8 | 187 | 37.9 | |||||||||||||
| YGG55R | 80 | 10 | 23.5 | 100 | 75 | 12.5 | 75 | 125.5 | 183.7 | 37.75 | 12.5 | 12.9 | M12X18 | 17.5 | 22 | 27.5 | G-PT1/8 |
| YGG55LR | 95 | 173.8 | 232 | 51.9 | |||||||||||||
| YGG65R | 90 | 12 | 31.5 | 126 | 76 | 25 | 70 | 160 | 232 | 60.8 | 15.8 | 12.9 | M16X20 | 25 | 15 | 15 | G-PT1/8 |
| YGG65LR | 120 | 223 | 295 | 67.3 | |||||||||||||
| Model | Spoorafmetings (mm) | Vermakingsskroef van Spoor | Basisladingstydskrifte | Toelaatbare Statiske Koppel | Gewig | ||||||||||
| WR | Ha | D | h | d | P | E | (mm) | C(CN) | Co(KN) | MR kN-m | MP kN-m | MY kN-m | Blok(kg) | Spoor(kg/m) | |
| YGG20R | 20 | 21 | 9.5 | 8.5 | 6 | 30 | 20 | M5X20 | 21.3 | 46.7 | 0.647 | 0.46 | 0.46 | 0.44 | 2.76 |
| YGG20LR | 26.9 | 63 | 0.872 | 0.837 | 0.837 | 0.62 | |||||||||
| YGG25R | 23 | 23.6 | 11 | 9 | 7 | 30 | 20 | M6X20 | 27.7 | 57.1 | 0.758 | 0.605 | 0.605 | 0.67 | 3.08 |
| YGG25LR | 33.9 | 73.4 | 0.975 | 0.991 | 0.991 | 0.86 | |||||||||
| YGG30R | 28 | 28 | 14 | 12 | 9 | 40 | 20 | M8X25 | 39.1 | 82.1 | 1.445 | 1.06 | 1.06 | 1.06 | 4.41 |
| YGG30LR | 48.1 | 105 | 1.846 | 1.712 | 1.712 | 1.42 | |||||||||
| YGG35R | 34 | 30.2 | 14 | 12 | 9 | 40 | 20 | M8X25 | 57.9 | 105.2 | 2.17 | 1.44 | 1.44 | 1.61 | 6.06 |
| YGG35LR | 73.1 | 142 | 2.93 | 2.6 | 2.6 | 2.21 | |||||||||
| YGG45R | 45 | 38 | 20 | 17 | 14 | 52.5 | 22.5 | M12x35 | 92.6 | 178.8 | 4.52 | 3.05 | 3.05 | 3.22 | 9.97 |
| YGG45LR | 116 | 230.9 | 6.33 | 5.47 | 5.47 | 4.41 | |||||||||
| YGG55R | 53 | 44 | 23 | 20 | 16 | 60 | 30 | M14X45 | 130.5 | 252 | 8.01 | 5.4 | 5.4 | 5.18 | 13.98 |
| YGG55LR | 167.8 | 348 | 11.15 | 10.25 | 10.25 | 7.34 | |||||||||
| YGG65R | 63 | 53 | 26 | 22 | 18 | 75 | 35 | M16X50 | 213 | 411.6 | 16.2 | 11.59 | 11.59 | 11.04 | 20.22 |
| YGG65LR | 275.3 | 572.7 | 22.55 | 22.17 | 22.17 | 15.75 | |||||||||
| Model | Komponent | Gleufafmetings | Vetkruis Spesifikasie | ||||||||||||||||
| H | H1 | N | W | B | B1 | C | C1 | L1 | L | K1 | K2 | G | M | T | T1 | H2 | H3 | ||
| YGG20C | 30 | 5 | 21.5 | 63 | 53 | 5 | 40 | 35 | 57.5 | 86 | 13.8 | 6 | 5.3 | M6 | 8 | 10 | 4.3 | 4.3 | G-M6 |
| YGG20LC | 77.5 | 106 | 12.8 | ||||||||||||||||
| YGG25C | 36 | 5.5 | 23.5 | 70 | 57 | 6.5 | 45 | 40 | 64.5 | 97.9 | 15.75 | 7.25 | 12 | M8 | 9.5 | 10 | 6.2 | 6 | G-M6 |
| YGG25LC | 81 | 114.4 | 24 | ||||||||||||||||
| YGG30C | 42 | 6 | 31 | 90 | 72 | 9 | 52 | 44 | 71 | 109.8 | 17.5 | 8 | 12 | M10 | 9.5 | 10 | 6.5 | 7.3 | G-M6 |
| YGG30LC | 93 | 131.8 | 28.5 | ||||||||||||||||
| YGG35C | 48 | 6.5 | 33 | 100 | 82 | 9 | 62 | 52 | 79 | 124 | 16.5 | 10 | 12 | M10 | 12 | 13 | 9 | 12.6 | G-M6 |
| YGG35LC | 106.5 | 151.5 | 30.25 | ||||||||||||||||
| YGG45C | 60 | 8 | 37.5 | 120 | 100 | 10 | 80 | 60 | 106 | 153.2 | 21 | 10 | 12.9 | M12 | 14 | 15 | 10 | 14 | G-PT1/8 |
| YGG45LC | 139.8 | 187 | 37.9 | ||||||||||||||||
| YGG55C | 70 | 10 | 43.5 | 140 | 116 | 12 | 95 | 70 | 125.5 | 183.7 | 27.75 | 12.5 | 12.9 | M14 | 16 | 17 | 12 | 17.5 | G-PT1/8 |
| YGG55LC | 173.8 | 232 | 51.9 | ||||||||||||||||
| YGG65C | 90 | 12 | 53.5 | 170 | 142 | 14 | 110 | 82 | 160 | 232 | 40.8 | 15.8 | 12.9 | M16 | 22 | 23 | 15 | 15 | G-PT1/8 |
| YGG65LC | 223 | 295 | 72.3 | ||||||||||||||||
| Model | Spoorafmetings (mm) | Vermakingsskroef van Spoor | Basisladingstydskrifte | Toelaatbare Statiske Koppel | Gewig | ||||||||||
| WR | HR | D | h | d | P | E | (mm) | C(KN) | Co(KN) | KN-m | KN-m | MY kN-m | Blok(kg) | Spoor(kg/m) | |
| YGG20C | 20 | 21 | 9.5 | 8.5 | 6 | 30 | 20 | M5X20 | 21.3 | 46.7 | 0.647 | 0.46 | 0.46 | 0.44 | 2.76 |
| YGG20LC | 26.9 | 63 | 0.872 | 0.837 | 0.837 | 0.62 | |||||||||
| YGG25C | 23 | 23.6 | 11 | 9 | 7 | 30 | 20 | M6X20 | 27.7 | 57.1 | 0.758 | 0.605 | 0.605 | 0.67 | 3.08 |
| YGG25LC | 33.9 | 73.4 | 0.975 | 0.991 | 0.991 | 0.86 | |||||||||
| YGG30C | 28 | 28 | 14 | 12 | 9 | 40 | 20 | M8X25 | 39.1 | 82.1 | 1.445 | 1.06 | 1.06 | 1.06 | 4.41 |
| YGG30LC | 48.1 | 105 | 1.846 | 1.712 | 1.712 | 1.42 | |||||||||
| YGG35C | 34 | 30.2 | 14 | 12 | 9 | 40 | 20 | M8X25 | 57.9 | 105.2 | 2.17 | 1.44 | 1.44 | 1.61 | 6.06 |
| 73.1 | 142 | 2.93 | 2.6 | 2.6 | 2.21 | ||||||||||
| YGG35LC | |||||||||||||||
| YGG45C | 45 | 38 | 20 | 17 | 14 | 52.5 | 22.5 | M12x35 | 92.6 | 178.8 | 4.52 | 3.05 | 3.05 | 3.22 | 9.97 |
| YGG45LC | 116 | 230.9 | 6.33 | 5.47 | 5.47 | 4.41 | |||||||||
| YGG55C YGG55LC | 53 | 44 | 23 | 20 | 16 | 60 | 30 | M14X45 | 130.5 167.8 | 252 348 | 8.01 11.15 | 5.4 10.25 | 5.4 10.25 | 5.18 7.34 | 13.98 |
| YGG65C | 63 | 53 | 26 | 22 | 18 | 75 | 35 | M16X50 | 213 | 411.6 | 16.2 | 11.59 | 11.59 | 11.04 | 20.22 |
| YGG65LC | 275.3 | 572.7 | 22.55 | 22.17 | 22.17 | 15.75 | |||||||||
Teken in op ons nuusbrief vir daaglikse nuut en opdaterings
Shanghai, China
YOSOmachinery
Copyright © Jingpeng Machinery&Equipment(Shanghai) Co.,Ltd All Rights Reserved
EN
AR
BG
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RU
ES
SV
TL
ID
UK
VI
HU
TH
TR
FA
AF
MS
SW
GA
CY
BE
KA
LA
MY
TG
UZ
