Eksterne sirkulasieontwerp kan swaar belasting, hoë spoed en hoë voeding verdrags. Hoë starheid, lae geraas, die hele lengte is tot 10 meter, die uitstrekkingslengte kan tot 19 meter wees, die nommerlike dinamiese belasting is 126 ton, die nommerlike statiese belasting is 595 ton
| Model NO. | Skroefas buite Diameter d | Voer Ph | Bal middelpunt-na-middelpunt Diameter dp | Draad klein Diameter dc | Aantal van belaste rye Rye X omskepe | Basisladingstydskrifte | Starre K N/um | |
| Ca kN | Ca kN | |||||||
| :5510-2.5 | 55 | 10 | 56.75 | 49.5 | 1x2.5 | 33.4 | 97 | 490 |
| :5510-5 | 55 | 10 | 56.75 | 49.5 | 2x2.5 | 60.7 | 194 | 950 |
| :5510-7.5 | 55 | 10 | 56.75 | 49.5 | 3x2.5 | 85.9 | 291.1 | 1390 |
| 5512-2.5 | 55 | 12 | 57 | 49.2 | 1x2.5 | 39.3 | 108.8 | 500 |
| :5512-3 | 55 | 12 | 57 | 49.2 | 2x1.5 | 46 | 131.3 | 590 |
| 5512-3.5 | 55 | 12 | 57 | 49.2 | 1x3.5 | 52.4 | 152.9 | 680 |
| :5512-5 | 55 | 12 | 57 | 49.2 | 2x2.5 | 71.3 | 218.5 | 960 |
| 5512-7.5 | 55 | 12 | 57 | 49.2 | 3x2.5 | 100.9 | 327.3 | 1420 |
| 5516-2.5 | 55 | 16 | 57.7 | 47.9 | 1x2.5 | 76.1 | 201.9 | 650 |
| 5516-5 | 55 | 16 | 57.7 | 47.9 | 2x2.5 | 138.2 | 402.8 | 1280 |
| 5520-2.5 | 55 | 20 | 57.7 | 47.9 | 1x2.5 | 76 | 201.9 | 660 |
| 5520-5 | 55 | 20 | 57.7 | 47.9 | 2x2.5 | 138.2 | 403.8 | 1280 |
| 6310-2.5 | 63 | 10 | 64.75 | 57.7 | 1x2.5 | 35.4 | 111.7 | 550 |
| 6310-5 | 63 | 10 | 64.75 | 57.7 | 2x2.5 | 64.2 | 222.5 | 1050 |
| :6310-7.5 | 63 | 10 | 64.75 | 57.7 | 3x2.5 | 90.9 | 334.2 | 1550 |
| 6312A-2.5 | 63 | 12 | 65.25 | 56.3 | 1x2.5 | 48.1 | 139.2 | 560 |
| :6312A-5 | 63 | 12 | 65.25 | 56.3 | 2x2.5 | 87.4 | 278.3 | 1090 |
| 6316-5 | 63 | 16 | 65.7 | 55.9 | 2x2.5 | 147 | 462.6 | 1420 |
| 6320-2.5 | 63 | 20 | 65.7 | 55.9 | 1x2.5 | 81 | 231.3 | 740 |
| 6320-5 | 63 | 20 | 65.7 | 55.9 | 2x2.5 | 147 | 463.5 | 1420 |
| Moern afmetings | Skruwas inertiale moment/mm kg·㎡/mm | Moer massa kg | As massa kg/m | |||||||
| Buite-diameter D | Flangediameter D1 | Totasylengte L1 | H | B1 | PCD | d,xd2xh | Smiersgat A | |||
| 102 | 144 | 81 | 18 | 63 | 122 | 11x17.5x11 | Rc1⁄8 (PT1⁄8) | 7.05x10° | 4.19 | 16.43 |
| 102 | 144 | 111 | 18 | 93 | 122 | 11x17.5x11 | 7.05x10° | 5.36 | 16.43 | |
| 102 | 144 | 141 | 18 | 123 | 122 | 11x17.5x11 | 7.05x10 | 6.54 | 16.43 | |
| 105 | 147 | 93 | 18 | 75 | 125 | 11x17.5x11 | 7.05x10° | 5.01 | 16.29 | |
| 105 | 147 | 107 | 18 | 89 | 125 | 11x17.5x11 | 7.05x10 | 5.6 | 16.29 | |
| 105 | 147 | 105 | 18 | 87 | 125 | 11x17.5x11 | 7.05x10° | 5.52 | 16.29 | |
| 105 | 147 | 129 | 18 | 111 | 125 | 11x17.5x11 | 7.05x10° | 6.54 | 16.29 | |
| 105 | 147 | 165 | 18 | 147 | 125 | 11x17.5x11 | 7.05x10 | 8.07 | 16.29 | |
| 110 | 158 | 116 | 25 | 91 | 133 | 14x20x13 | 7.05x10 | 7.4 | 15.46 | |
| 110 | 158 | 164 | 25 | 139 | 133 | 14x20x13 | 7.05x10° | 9.73 | 15.46 | |
| 112 | 158 | 127 | 28 | 99 | 134 | 14x20x13 | 7.05x10° | 8.4 | 16.1 | |
| 112 | 158 | 187 | 28 | 159 | 134 | 14x20x13 | 7.05x10° | 11.45 | 16.1 | |
| 108 | 154 | 77 | 22 | 55 | 130 | 14x20x13 | 1.21x10 | 4.57 | 21.93 | |
| 108 | 154 | 107 | 22 | 85 | 130 | 14x20x13 | 1.21x10° | 5.77 | 21.93 | |
| 108 | 154 | 137 | 22 | 115 | 130 | 14x20x13 | 1.21x10° | 6.98 | 21.93 | |
| 115 | 161 | 87 | 22 | 65 | 137 | 14x20x13 | 1.21x10° | 5.8 | 21.14 | |
| 115 | 161 | 123 | 22 | 101 | 137 | 14x20x13 | 1.21x10° | 7.56 | 21.14 | |
| 122 | 184 | 160 | 24 | 136 | 152 | 18x26x17.5 | 1.21x10° | 11.82 | 20.85 | |
| 122 | 180 | 127 | 28 | 99 | 150 | 18x26x17.5 | 1.21x10 | 10.1 | 21.57 | |
| 122 | 180 | 187 | 28 | 159 | 150 | 18x26x17.5 | 1.21x10° | 13.58 | 21.57 | |
| Model NO. | Skroefas buite Diameter d | Voer Ph | Bal middelpunt-na-middelpunt Diameter dp | Draad klein Diameter dc | Aantal van belaaide sake Rye X omwentelings | Basisladingstydskrifte | Startheid K N\/μm | |
| Ca kN | Cua KN | |||||||
| 7010-2.5 | 70 | 10 | 71.75 | 64.5 | 1x2.5 | 36.8 | 123.5 | 590 |
| 7010-5 | 70 | 10 | 71.75 | 64.5 | 2x2.5 | 66.9 | 247 | 1140 |
| 7010-7.5 | 70 | 10 | 71.75 | 64.5 | 3x2.5 | 94.9 | 371.4 | 1680 |
| 7012-2.5 | 70 | 12 | 72 | 64.2 | 1x2.5 | 43.5 | 139.2 | 600 |
| 7012-5 | 70 | 12 | 72 | 64.2 | 2x2.5 | 78.9 | 278.3 | 1160 |
| 7012-7.5 | 70 | 12 | 72 | 64.2 | 3x2.5 | 111.7 | 417.5 | 1710 |
| 7020-5 | 70 | 20 | 72.7 | 62.9 | 2x2.5 | 153.9 | 514.5 | 1550 |
| 8010-2.5 | 80 | 10 | 81.75 | 75.2 | 1x2.5 | 38.9 | 141.1 | 650 |
| 8010-5 | 80 | 10 | 81.75 | 75.2 | 2x2.5 | 70.6 | 283.2 | 1270 |
| 8010-7.5 | 80 | 10 | 81.75 | 75.2 | 3x2.5 | 100 | 424.3 | 1860 |
| 8020A-2.5 | 80 | 20 | 82.7 | 72.9 | 1x2.5 | 90.1 | 294 | 890 |
| 8020A-5 | 80 | 20 | 82.7 | 72.9 | 2x2.5 | 163.7 | 589 | 1720 |
| 8020A-7.5 | 80 | 20 | 82.7 | 72.9 | 3x2.5 | 231.6 | 883.2 | 2520 |
| 10020A-2.5 | 100 | 20 | 102.7 | 92.9 | 1x2.5 | 99 | 368.5 | 2110 |
| 10020A-5 | 100 | 20 | 102.7 | 92.9 | 2x2.5 | 179.3 | 737 | 4080 |
| 10020A-7.5 | 100 | 20 | 102.7 | 92.9 | 3x2.5 | 253.8 | 1105.4 | 6010 |
| Moern afmetings | Skruwas inertiale moment/mm kg·㎡/mm | Moer massa kg | As massa kg/m | |||||||
| Buite-diameter D | Flangediameter D1 | Totasylengte L1 | H | B1 | PCD | d1xd2xh | Smiersgat A | |||
| 125 | 167 | 81 | 18 | 63 | 145 | 11x17.5x11 | Rc1⁄8 (PT1⁄8) | 1.85x10 | 5.8 | 27.4 |
| 125 | 167 | 111 | 18 | 93 | 145 | 11x17.5x11 | 1.85x10 | 7.49 | 27.4 | |
| 125 | 167 | 141 | 18 | 123 | 145 | 11x17.5x11 | 1.85x10° | 9.19 | 27.4 | |
| 128 | 170 | 93 | 18 | 75 | 148 | 11x17.5x11 | 1.85x10 | 6.89 | 27.24 | |
| 128 | 170 | 129 | 18 | 111 | 148 | 11x17.5x11 | 1.85x10 | 9.08 | 27.24 | |
| 128 | 170 | 165 | 18 | 147 | 148 | 11x17.5x11 | 1.85x10 | 11.26 | 27.24 | |
| 130 | 186 | 185 | 28 | 157 | 158 | 18x26x17.5 | 1.85x10 | 14.5 | 27 | |
| 130 | 176 | 77 | 22 | 55 | 152 | 14x20x13 | 3.16x10 | 5.9 | 36.26 | |
| 130 | 176 | 107 | 22 | 85 | 152 | 14x20x13 | 3.16x10 | 7.53 | 36.26 | |
| 130 | 176 | 137 | 22 | 115 | 152 | 14x20x13 | 3.16x10° | 9.15 | 36.26 | |
| 143 | 204 | 127 | 28 | 99 | 172 | 18x26x17.5 | 3.16x10° | 12.68 | 35.81 | |
| 143 | 204 | 187 | 28 | 159 | 172 | 18x26x17.5 | 3.16x10 | 17.12 | 35.81 | |
| 143 | 204 | 247 | 28 | 219 | 172 | 18x26x17.5 | 3.16x10 | 21.56 | 35.81 | |
| 170 | 243 | 131 | 32 | 99 | 205 | 22x32x21.5 | 7.71x10 | 18.28 | 57.13 | |
| 170 | 243 | 191 | 32 | 159 | 205 | 22x32x21.5 | 7.71x10 | 24.2 | 57.13 | |
| 170 | 243 | 251 | 32 | 219 | 205 | 22x32x21.5 | 7.71x10 | 30.12 | 57.13 | |
Teken in op ons nuusbrief vir daaglikse nuut en opdaterings
Shanghai, China
YOSOmachinery
Copyright © Jingpeng Machinery&Equipment(Shanghai) Co.,Ltd All Rights Reserved
EN
AR
BG
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RU
ES
SV
TL
ID
UK
VI
HU
TH
TR
FA
AF
MS
SW
GA
CY
BE
KA
LA
MY
TG
UZ
