Mga kahitang-pamamaraan ng THK BNF6312A-5 ball screw
Industriya ng machine tool: Sa sistemang feed ng machine tools, ginagamit ang ball screws bilang pangunahing bahagi. Maaaring magbigay ang THK BNF6312A-5 ball screw ng presisong linya ng paggalaw upang tiyakin ang katuturan at kabilisngan ng machine tools habang nagproseso. Mahirap gamitin ang mga tradisyonal na paraan ng pagsusuri para makumpleto ang wastong at buong pag-aanalisa, samantalang maaaring gawin ito gamit ang advanced na software ng finite element analysis tulad ng ANSYS upang gawin ang modal analysis sa ball screws upang pag-aralan ang kanilang libreng pagpupulso nang walang damping, kung saan makukuha ang mga natural frequency at vibration models.
| Modelo NO. | Turnilyo labas ng shaft diameterD |
Tungkol
PH |
Sentro ng bola- hanggang-gitna diameterdp |
Sugat minorya diameterdc |
Bilang ng nai-load circuitsRows X turns |
Pangunahing rating ng load | Katibayan
K N⁄μm |
|
| Ca
kN |
Co
kN |
|||||||
| BNF 5510-2.5 | 55 | 10 | 56.75 | 49.5 | 1x2.5 | 33.4 | 97 | 490 |
| BNF 5510-5 | 55 | 10 | 56.75 | 49.5 | 2×2.5 | 60.7 | 194 | 950 |
| BNF 5510-7.5 | 55 | 10 | 56.75 | 49.5 | 3×2.5 | 85.9 | 291.1 | 1390 |
| BNF 5512-2.5 | 55 | 57 | 49.2 | 1×2.5 | 39.3 | 108.8 | 500 | |
| BNF 5512-3 | 55 | 12 | 57 | 49.2 | 2x1.5 | 46 | 131.3 | 590 |
| BNF 5512-3.5 | 55 | 12 | 57 | 49.2 | 1×3.5 | 52.4 | 152.9 | 680 |
| BNF 5512-5 | 55 | 12 | 57 | 49.2 | 2×2.5 | 71.3 | 218.5 | 960 |
| BNF 5512-7.5 | 55 | 12 | 57 | 49.2 | 3×2.5 | 100.9 | 327.3 | 1420 |
| BNF 5516-2.5 | 55 | 16 | 57.7 | 47.9 | 1x2.5 | 76.1 | 201.9 | 650 |
| BNF 5516-5 | 55 | 16 | 57.7 | 47.9 | 2×2.5 | 138.2 | 402.8 | 1280 |
| BNF 5520-2.5 | 55 | 20 | 57.7 | 47.9 | 1×2.5 | 76 | 201.9 | 660 |
| BNF 5520-5 | 55 | 20 | 57.7 | 47.9 | 2×2.5 | 138.2 | 403.8 | 1280 |
| BNF 6310-2.5 | 63 | 10 | 64.75 | 57.7 | 1×2.5 | 35.4 | 111.7 | 550 |
| BNF 6310-5 | 63 | 10 | 64.75 | 57.7 | 2×2.5 | 64.2 | 222.5 | 1050 |
| BNF 6310-7.5 | 63 | 10 | 64.75 | 57.7 | 3×2.5 | 90.9 | 334.2 | 1550 |
| BNF 6312A-2.5 | 63 | 12 | 65.25 | 56.3 | 1×2.5 | 48.1 | 139.2 | 560 |
| BNF 6312A-5 | 63 | 12 | 65.25 | 56.3 | 2×2.5 | 87.4 | 278.3 | 1090 |
| BNF 6316-5 | 63 | 16 | 65.7 | 55.9 | 2×2.5 | 147 | 462.6 | 1420 |
| BNF 6320-2.5 | 63 | 20 | 65.7 | 55.9 | 1×2.5 | 81 | 231.3 | 740 |
| BNF 6320-5 | 63 | 20 | 65.7 | 55.9 | 2x2.5 | 147 | 463.5 | 1420 |
| Sukat ng nut | Sakong bulag inertyal momento/mm kg-m²/mm |
Nut masskg |
Shaft timbangkg/m |
|||||||
| Outer diyametro D |
Flange diyametro D₁ |
PANGKALAHATANG habà L |
H | B₁ | PCD | d₁Xd₂ ×h | Lubrication butas A |
|||
| 102 | 144 | 81 | 18 | 63 | 122 | 11×17.5×11 | Rc1⁄8 (PT1\/8) |
7.05x10 | 4.19 | 16.43 |
| 102 | 144 | 111 | 18 | 93 | 122 | 11×17.5×11 | 7.05x10 | 5.36 | 16.43 | |
| 102 | 144 | 141 | 18 | 123 | 122 | 11×17.5×11 | 7.05×106 | 6.54 | 16.43 | |
| 105 | 147 | 93 | 18 | 75 | 125 | 11×17.5×11 | 7.05x10 | 5.01 | 16.29 | |
| 105 | 147 | 107 | 18 | 89 | 125 | 11×17.5×11 | 7.05x10 | 5.6 | 16.29 | |
| 105 | 147 | 105 | 18 | 87 | 125 | 11×17.5×11 | 7.05×10⁶ | 5.52 | 16.29 | |
| 105 | 147 | 129 | 18 | 111 | 125 | 11×17.5×11 | 7.05x10 | 6.54 | 16.29 | |
| 105 | 147 | 165 | 18 | 147 | 125 | 11×17.5×11 | 7.05×10° | 8.07 | 16.29 | |
| 110 | 158 | 116 | 25 | 91 | 133 | 14X20×13 | 7.05×10 | 7.4 | 15.46 | |
| 110 | 158 | 164 | 25 | 139 | 133 | 14×20×13 | 7.05x10 | 9.73 | 15.46 | |
| 112 | 158 | 127 | 28 | 99 | 134 | 14×20X13 | 7.05×106 | 8.4 | 16.1 | |
| 112 | 158 | 187 | 28 | 159 | 134 | 14×20×13 | 7.05x10 | 11.45 | 16.1 | |
| 108 | 154 | 77 | 22 | 55 | 130 | 14×20X13 | 1.21×105 | 4.57 | 21.93 | |
| 108 | 154 | 107 | 22 | 85 | 130 | 14×20×13 | 1.21×105 | 5.77 | 21.93 | |
| 108 | 154 | 137 | 22 | 115 | 130 | 14×20×13 | 1.21x10 | 6.98 | 21.93 | |
| 115 | 161 | 87 | 22 | 65 | 137 | 14×20×13 | 1.21×105 | 5.8 | 21.14 | |
| 115 | 161 | 123 | 22 | 101 | 137 | 14×20X13 | 1.21×105 | 7.56 | 21.14 | |
| 122 | 184 | 160 | 24 | 136 | 152 | 18×26×17.5 | 1.21×10⁵ | 11.82 | 20.85 | |
| 122 | 180 | 127 | 28 | 99 | 150 | 18×26×17.5 | 1.21x10 | 10.1 | 21.57 | |
| 122 | 180 | 187 | 28 | 159 | 150 | 18×26×17.5 | 1.21x10 | 13.58 | 21.57 | |
Mag-subscribe sa aming newsletter para sa mga bagong update araw-araw
Shanghai, Tsina
YOSOmachinery
Kopirait © Jingpeng Machinery&Equipment(Shanghai) Co.,Ltd Lahat ng Mga Karapatan Ay Nakakahawak
EN
AR
BG
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RU
ES
SV
TL
ID
UK
VI
HU
TH
TR
FA
AF
MS
SW
GA
CY
BE
KA
LA
MY
TG
UZ
