Pagpapanatili:
Kailangang magbigay ng regula na pagsisilbi sa THK BNF2004V-2.5 ball screw, kabilang ang paglilinis, pagsusuri sa pagkawas ng mga bola at raceways, pag-adjust ng preload, atbp. Kung matatagpuan na may abnormal na pagkawas, dagdag na tunog o bumaba ang katumpakan ng THK BNF2004V-2.5 ball screw, kinakailangan itong ipag-isipang ayusin o palitan agad.
Ang kilos ng joint ng robot ay madalas nangangailangan ng isang mataas na presisyon at mataas na katigasan ng sistema ng transmisyon. Ang THK BNF2004V-2.5 ball screw ay maaaring magbigay ng presisong linya ng kilusan para sa robot, na nagpapahayag ng iba't ibang aksyon ng robot.
Sa dulo, ang THK BNF2004V-2.5 ball screw ay isang mataas na pagganap na komponente ng mekanikal na transmisyon na may characteristics ng mataas na presisyon, mataas na katigasan, mataas na ekispedisyon, mababang tunog at mahabang buhay. Ito ay madalas gamitin sa CNC machine tools, automated production lines, robots at medical equipment. Kapag inuinstalo at ginagamit ang THK BNF2004V-2.5 ball screws, dapat tingnan ang mga requirement ng pag-instalo, lubrikasyon at pagsisilbi upang siguruhing mapanatili ang kanyang pagganap at reliwablidad.
| Modelo NO. | Turnilyo labas ng shaft diameterD |
Tungkol
PH |
Sentro ng bola- hanggang-gitna diameterdp |
Sugat minorya diameterdc |
Bilang ng nai-load circuitsRows X turns |
Pangunahing rating ng load | Katibayan
K N⁄μm |
|
| Ca
kN |
Co
kN |
|||||||
| BNF 1604V-5 | 16 | 4 | 16.5 | 13.8 | 2x2.5 | 7.8 | 17.4 | 290 |
| BNF 1605V-2.5 | 16 | 5 | 16.75 | 13.2 | 1×2.5 | 7.4 | 13.9 | 170 |
| BNF 1605V-5 | 16 | 5 | 16.75 | 13.2 | 2×2.5 | 13.5 | 27.9 | 320 |
| BNF 2004V-2.5 | 20 | 4 | 20.5 | 17.8 | 1x2.5 | 4.8 | 10.9 | 180 |
| BNF 2004V-5 | 20 | 4 | 20.5 | 17.8 | 2×2.5 | 8.6 | 21.8 | 350 |
| BNF 2005V-2.5 | 20 | 5 | 20.75 | 17.2 | 1×2.5 | 8.3 | 17.5 | 200 |
| BNF 2005V-5 | 20 | 5 | 20.75 | 17.2 | 2×2.5 | 15.1 | 35 | 380 |
| BNF 2010V-2.5 | 20 | 10 | 20.75 | 17.2 | 1×2.5 | 8.3 | 17.6 | 197 |
| BNF 2504V-2.5 | 25 | 4 | 25.5 | 22.8 | 1×2.5 | 5.2 | 13.7 | 210 |
| BNF 2504V-5 | 25 | 4 | 25.5 | 22.8 | 2×2.5 | 9.5 | 27.4 | 410 |
| BNF 2505V-2.5 | 25 | 5 | 25.75 | 22.2 | 1×2.5 | 9.2 | 21.9 | 240 |
| BNF 2505V-5 | 25 | 5 | 25.75 | 22.2 | 2×2.5 | 16.7 | 43.9 | 460 |
| BNF 2506V-2.5 | 25 | 6 | 26 | 21.4 | 1×2.5 | 12.4 | 27.4 | 250 |
| BNF 2506V-5 | 25 | 6 | 26 | 21.4 | 2×2.5 | 22.6 | 54.8 | 470 |
| BNF 2805V-2.5 | 28 | 5 | 28.75 | 25.2 | 1×2.5 | 9.7 | 24.6 | 250 |
| BNF 2805V-5 | 28 | 5 | 28.75 | 25.2 | 2×2.5 | 17.5 | 49.2 | 500 |
| BNF 2805V-7.5 | 28 | 5 | 28.75 | 25.2 | 3×2.5 | 24.8 | 73.8 | 740 |
| BNF 2806V-2.5 | 28 | 6 | 28.75 | 25.2 | 1x2.5 | 9.6 | 24.6 | 250 |
| BNF 2806V-5 | 28 | 6 | 28.75 | 25.2 | 2×2.5 | 17.5 | 49.2 | 500 |
| BNF 2806V-7.5 | 28 | 6 | 28.75 | 25.2 | 3×2.5 | 24.8 | 73.8 | 740 |
| BNF 3205V-2.5 | 32 | 5 | 32.75 | 29.2 | 1×2.5 | 10.2 | 28.1 | 280 |
| BNF 3205V-5 | 32 | 5 | 32.75 | 29.2 | 2×2.5 | 18.5 | 56.3 | 560 |
| BNF 3205V-7.5 | 32 | 5 | 32.75 | 29.2 | 3×2.5 | 26.2 | 84.4 | 810 |
| BNF 3206V-2.5 | 32 | 6 | 33 | 28.4 | 1×2.5 | 13.9 | 35.2 | 290 |
| BNF 3206V-5 | 32 | 6 | 33 | 28.4 | 2x2.5 | 25.2 | 70.3 | 580 |
| Sukat ng nut | Sakong bulag inertyal sandamg/mmkg·m²/mm |
Nut masskg |
Shaft timbangkg/m |
Maximum pinapayagan bilis ng pag-ikotmin- |
|||||||
| Outer diameterD |
Flange diyametro D₁ |
Kabuuang haba L |
H | B₁ | PCD | d₁ ×d₂Xh | Lubrication butas A |
||||
| 36 | 59 | 53 | 11 | 42 | 47 | 5.5×9.5×5.5 | M6 | 5.05×10− | 0.42 | 1.42 | 5000 |
| 40 | 60 | 41 | 10 | 31 | 50 | 4.5×8×4.5 | M6 | 5.05X10- | 0.37 | 1.37 | 5000 |
| 40 | 60 | 56 | 10 | 46 | 50 | 4.5×8×4.5 | M6 | 5.05×10 | 0.49 | 1.37 | 5000 |
| 40 | 63 | 37 | 11 | 26 | 51 | 5.5×9.5×5.5 | M6 | 1.23×10- | 0.3 | 2.22 | 4870 |
| 40 | 63 | 49 | 11 | 38 | 51 | 5.5×9.5×5.5 | M6 | 1.23×10-7 | 0.49 | 2.22 | 4870 |
| 44 | 67 | 41 | 11 | 30 | 55 | 5.5×9.5×5.5 | M6 | 1.23×10-7 | 0.46 | 2.19 | 4810 |
| 44 | 67 | 56 | 11 | 45 | 55 | 5.5×9.5×5.5 | M6 | 1.23X10- | 0.6 | 2.19 | 4810 |
| 46 | 74 | 58 | 15 | 43 | 59 | 5.5×9.5×5.5 | M6 | 1.23×10-7 | 0.68 | 2.46 | 4810 |
| 46 | 69 | 36 | 11 | 25 | 57 | 5.5×9.5×5.5 | M6 | 3.01×10-7 | 0.21 | 3.6 | 3920 |
| 46 | 69 | 48 | 11 | 37 | 57 | 5.5×9.5×5.5 | M6 | 3.01×10-7 | 0.55 | 3.6 | 3920 |
| 50 | 73 | 40 | 11 | 29 | 61 | 5.5X9.5X5.5 | M6 | 3.01X10 | 0.52 | 3.52 | 3880 |
| 50 | 73 | 55 | 11 | 44 | 61 | 5.5×9.5×5.5 | M6 | 3.01X10- | 0.68 | 3.52 | 3880 |
| 53 | 76 | 44 | 11 | 33 | 64 | 5.5X9.5X5.5 | M6 | 3.01×10-7 | 0.61 | 3.43 | 3840 |
| 53 | 76 | 62 | 11 | 51 | 64 | 5.5×9.5×5.5 | M6 | 3.01×10-7 | 0.91 | 3.43 | 3840 |
| 55 | 85 | 44 | 12 | 32 | 69 | 6.6×11×6.5 | M6 | 4.74×107 | 1.02 | 4.45 | 3470 |
| 55 | 85 | 59 | 12 | 47 | 69 | 6.6×11×6.5 | M6 | 4.74×10-7 | 1.06 | 4.45 | 3470 |
| 55 | 85 | 74 | 12 | 62 | 69 | 6.6×11×6.5 | M6 | 4.74×107 | 1.16 | 4.45 | 3470 |
| 55 | 85 | 50 | 12 | 38 | 69 | 6.6×11×6.5 | M6 | 4.74X10- | 0.87 | 4.52 | 3470 |
| 55 | 85 | 68 | 12 | 56 | 69 | 6.6×11×6.5 | M6 | 4.74X10-7 | 1.09 | 4.52 | 3470 |
| 55 | 85 | 86 | 12 | 74 | 69 | 6.6×11×6.5 | M6 | 4.74×10-7 | 1.3 | 4.52 | 3470 |
| 58 | 85 | 41 | 12 | 29 | 71 | 6.6x11x6.5 | M6 | 8.08X10- | 0.76 | 5.89 | 3050 |
| 58 | 85 | 56 | 12 | 44 | 71 | 6.6×11×6.5 | M6 | 8.08×10-7 | 0.94 | 5.89 | 3050 |
| 58 | 85 | 71 | 12 | 59 | 71 | 6.6x11x6.5 | M6 | 8.08x10 | 1.13 | 5.89 | 3050 |
| 62 | 89 | 45 | 12 | 33 | 75 | 6.6×11×6.5 | M6 | 8.08×10-7 | 0.94 | 5.88 | 3030 |
| 62 | 89 | 63 | 12 | 51 | 75 | 6.6×11×6.5 | M6 | 8.08X10- | 1.21 | 5.88 | 3030 |
Mag-subscribe sa aming newsletter para sa mga bagong update araw-araw
Shanghai, Tsina
YOSOmachinery
Kopirait © Jingpeng Machinery&Equipment(Shanghai) Co.,Ltd Lahat ng Mga Karapatan Ay Nakakahawak
EN
AR
BG
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RU
ES
SV
TL
ID
UK
VI
HU
TH
TR
FA
AF
MS
SW
GA
CY
BE
KA
LA
MY
TG
UZ
