Prestasie
[4-rigting gelyk lading]Elke ry balle word op 'n kontakhoek van 45 ° geplaas sodat die nominale laste wat op die LM-blokkeringsuniform toegepas word, in die vier rigtings (radiële, omgekeerde radiale en syrigting) toegedien word, sodat die THK HSR55HB Lineêre
[Tipe met hoë styfheid]Aangesien balle in vier rye op 'n goed gebalanseerde manier geplaas word, kan 'n groot voorbelasting toegepas word en kan die styfheid in vier rigtings maklik verhoog word.
[Self-aanpassingskapasiteit]Die self-aanpassingskapasiteit deur middel van die voor-tot-vorentoe-konfigurasie van THK HSR55HB Lineêre Guide unieke sirkulêre booggroef (DF-stel) maak dit moontlik om 'n monteringfout selfs onder 'n voorbelasting te absorbeer,
[High Duursame]Selfs onder 'n voorlaai of oormatige vooroordeel las, verskil glip van balle nie voorkom nie. As gevolg hiervan, gladde beweging,THK HSR55HB Lineêre Guide hoë slijtvastheid, en langtermyn instandhouding van akkuraatheid bereik.
[Type roesvrye staal ook beskikbaar]THK HSR55HB Lineêre Gids 'n spesiale tipe wat LM blok, LM spoor en balle is gemaak van roesvrye staal is ook beskikbaar
| Model NO. | Buite afmetings | LM-blok afmetings | Pilootgat vir kantelnapel |
H₃ | ||||||||||||||
| Hoogte
M |
Breëte
W |
Lengte
L |
B | C | H | L₁ | t | T | T₁ | K | N | E | Greas tepel |
eO | f₀ | D₀ | ||
| HSR 20CB HSR 20CBM |
30 | 63 | 74 | 53 | 40 | 6 | 50.8 | 10 | 9.5 | 10 | 26 | 5 | 12 | B-M6F | 3.1 | 3.4 | 3 | 4 |
| HSR 20HB HSR 20HBM |
30 | 63 | 90 | 53 | 40 | 6 | 66.8 | 10 | 9.5 | 10 | 26 | 5 | 12 | B-M6F | 3.1 | 3.4 | 3 | 4 |
| HSR 25CB HSR 25CBM |
36 | 70 | 83.1 | 57 | 45 | 7 | 59.5 | 16 | 11 | 10 | 30.5 | 6 | 12 | B-M6F | 3.5 | 4 | 3 | 5.5 |
| HSR 25HB HSR 25HBM |
36 | 70 | 1022 | 57 | 45 | 7 | 78.6 | 16 | 11 | 10 | 30.5 | 6 | 12 | B-M6F | 3.5 | 4 | 3 | 5.5 |
| HSR 30CB HSR 30CBM |
42 | 90 | 98 | 72 | 52 | 9 | 70.4 | 18 | 9 | 10 | 35 | 7 | 12 | B-M6F | 5.2 | 6.2 | 5.2 | 7 |
| HSR 30HB HSR 30HBM |
42 | 90 | 120.6 | 72 | 52 | 9 | 93 | 18 | 9 | 10 | 35 | 7 | 12 | B-M6F | 5.2 | 6.2 | 5.2 | 7 |
| HSR 35CB HSR 35CBM |
48 | 100 | 109.4 | 82 | 62 | 9 | 80.4 | 21 | 12 | 13 | 40.5 | 8 | 12 | B-M6F | 5.5 | 5.6 | 5.2 | 7.5 |
| HSR 35HB HSR 35HBM |
48 | 100 | 134.8 | 82 | 62 | 9 | 105.8 | 21 | 12 | 13 | 40.5 | 8 | 12 | B-M6F | 5.5 | 5.6 | 5.2 | 7.5 |
| HSR 45CB HSR 45HB |
60 | 120 | 139 170.8 |
100 | 80 | 11 | 98 129.8 |
25 | 13 | 15 | 50 | 10 | 16 | B-PT1/8 | 6.1 | 6.6 | 5.2 | 10 |
| HSR 55CB HSR 55HB |
70 | 140 | 163 201.1 |
116 | 95 | 14 | 118 156.1 |
29 | 13.5 | 17 | 57 | 11 | 16 | B-PT1/8 | 5.6 | 7.7 | 5.2 | 13 |
| HSR 65XCB HSR 65XHB |
90 | 170 | 190.5 250 |
142 | 110 | 16 | 138.5 198 |
37 | 21.5 | 23 | 76 | 19 | 16 | B-PT1/8 | 6.8 | 14.6 | 5.2 | 14 |
| HSR 85CB HSR 85HB |
110 | 215 | 245.6 303 |
185 | 140 | 18 | 178.6 236 |
55 | 28 | 30 | 94 | 23 | 16 | B-PT1/8 | 16 | |||
| LM-rail afmetings | Basiese laaibranding | Statiske toelaatbare oombuiging kN·m* | Massa | |||||||||||
| Breëte
± .05 |
W₂ | Hoogte
M₁ |
Stap
F |
d₁Xd₂Xh | Lengte*
Max |
C
kN |
C₀
kN |
MA | MA | MC | LM blokkg |
LM railkg/m |
||
| 1 blok |
Dubbel klere |
blok | Dubbel klere |
1 blok |
||||||||||
| 20 | 21.5 | 18 | 60 | 6×9.5×8.5 | 3000 (14 80) |
19.8 | 27.4 | 0.218 | 1.2 | 0.218 | 1.2 | 0.235 | 0.35 | 2.3 |
| 20 | 21.5 | 18 | 60 | 6×9.5×8.5 | 3000 (1480) |
23.9 | 35.8 | 0.363 | 1.87 | 0.363 | 1.87 | 0.307 | 0.47 | 2.3 |
| 23 | 23.5 | 22 | 60 | 7×11×9 | 3000 (2020) |
27.6 | 36.4 | 0.324 | 1.8 | 0.324 | 1.8 | 0.366 | 0.59 | 3.3 |
| 23 | 23.5 | 22 | 60 | 7×11×9 | 3000 (2020) |
35.2 | 51.6 | 0.627 | 3.04 | 0.627 | 3.04 | 0.518 | 0.75 | 3.3 |
| 28 | 31 | 26 | 80 | 9×14×12 | 3000 (2520) |
40.5 | 53.7 | 0.599 | 3.1 | 0.599 | 3.1 | 0.652 | 1.1 | 4.8 |
| 28 | 31 | 26 | 80 | 9×14×12 | 3000 (2520) |
48.9 | 70.2 | 0.995 | 4.89 | 0.995 | 4.89 | 0.852 | 1.3 | 4.8 |
| 34 | 29 | 80 | 9×14×12 | 3000 (2520) |
53.9 | 70.2 | 0.895 | 4.51 | 0.895 | 4.51 | 1.05 | 1.6 | 6.6 | |
| 34 | 33 | 29 | 80 | 9×14×12 | 3000 (2520) |
65 | 91.7 | 1.49 | 7.13 | 1.49 | 7.13 | 1.37 | 2 | 6.6 |
| 45 | 37.5 | 38 | 105 | 14×20×17 | 3090 | 82.2 100 |
101 135 |
1.5 2.59 |
8.37 13.4 |
1.5 2.59 |
8.37 13.4 |
1.94 2.6 |
2.8 3.3 |
11 |
| 53 | 43.5 | 44 | 120 | 16×23×20 | 3060 | 121 148 |
146 194 |
2.6 4.46 |
14.1 22.7 |
2.6 4.46 |
14.1 22.7 |
3.43 4.56 |
4.5 5.7 |
15.1 |
| 63 | 53.5 | 53 | 150 | 18×26×22 | 3000 | 195 249 |
228 323 |
5.08 9.81 |
25 45.6 |
5.08 9.81 |
25 45.6 |
6.2 8.79 |
8.5 10.7 |
22.5 |
| 85 | 65 | 65 | 180 | 24×35×28 | 3000 | 304 367 |
355 464 |
10.2 16.9 |
51.2 81 |
10.2 16.9 |
51.2 81 |
12.8 16.7 |
17 23 |
35.2 |
Teken in op ons nuusbrief vir daaglikse nuut en opdaterings
Shanghai, China
YOSOmachinery
Kopiereg © Jingpeng Machinery&Equipment(Shanghai) Co.,Ltd Alle regte voorbehou
EN
AR
BG
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RU
ES
SV
TL
ID
UK
VI
HU
TH
TR
FA
AF
MS
SW
GA
CY
BE
KA
LA
MY
TG
UZ
