Onderhoud:
Handhaaf die THK BNF2004V-2.5 kugelskroef regelmatig, insluitend skoonmaak, toets van versleting van die kugels en baanwye, aanpas van die voorspoed, ens. As afnormale versleting, verhoogde geraas of verminderde akkuraatheid by die THK BNF2004V-2.5 kugelskroef gevind word, moet dit tydig gerepareer of vervang word.
Die kombinasiebeweging van die robot vereis gewoonlik 'n hoë-graderige en hoë-verstektransmissiestelsel. Die THK BNF2004V-2.5 kugelskroef kan presiese lynêre beweging vir die robot verskaf, wat daardeur verskeie aksies van die robot realiseer.
In gevolg, is die THK BNF2004V-2.5 kugelskroef 'n hoë-prestasie meganiese transmissiekomponent met die kenmerke van hoë akkuraatheid, hoë verstektheid, hoë doeltreffendheid, lae geraas en lange lewe. Dit word wydverspreid in CNC-masnery, outomatiseerde produksielyne, robots en mediese toerusting gebruik. Tydens die installasie en gebruik van THK BNF2004V-2.5 kugelskroewe, moet aandag geskenk word aan installasievereistes, smearing en onderhoud om se prestasie en betroubaarheid te verseker.
| Model NO. | Skroef as buite deursnedeD |
Voorloper
PH |
Bal middelpunt- tot-sentrum diameterdp |
Draad minor diameterdc |
Aantal van gelaai kringsrye X omskakeling |
Basisladingstydskrifte | Starheid
K N⁄μm |
|
| CA
kN |
Coa
kN |
|||||||
| BNF 1604V-5 | 16 | 4 | 16.5 | 13.8 | 2x2.5 | 7.8 | 17.4 | 290 |
| BNF 1605V-2.5 | 16 | 5 | 16.75 | 13.2 | 1×2.5 | 7.4 | 13.9 | 170 |
| BNF 1605V-5 | 16 | 5 | 16.75 | 13.2 | 2×2.5 | 13.5 | 27.9 | 320 |
| BNF 2004V-2.5 | 20 | 4 | 20.5 | 17.8 | 1x2.5 | 4.8 | 10.9 | 180 |
| BNF 2004V-5 | 20 | 4 | 20.5 | 17.8 | 2×2.5 | 8.6 | 21.8 | 350 |
| BNF 2005V-2.5 | 20 | 5 | 20.75 | 17.2 | 1×2.5 | 8.3 | 17.5 | 200 |
| BNF 2005V-5 | 20 | 5 | 20.75 | 17.2 | 2×2.5 | 15.1 | 35 | 380 |
| BNF 2010V-2.5 | 20 | 10 | 20.75 | 17.2 | 1×2.5 | 8.3 | 17.6 | 197 |
| BNF 2504V-2.5 | 25 | 4 | 25.5 | 22.8 | 1×2.5 | 5.2 | 13.7 | 210 |
| BNF 2504V-5 | 25 | 4 | 25.5 | 22.8 | 2×2.5 | 9.5 | 27.4 | 410 |
| BNF 2505V-2.5 | 25 | 5 | 25.75 | 22.2 | 1×2.5 | 9.2 | 21.9 | 240 |
| BNF 2505V-5 | 25 | 5 | 25.75 | 22.2 | 2×2.5 | 16.7 | 43.9 | 460 |
| BNF 2506V-2.5 | 25 | 6 | 26 | 21.4 | 1×2.5 | 12.4 | 27.4 | 250 |
| BNF 2506V-5 | 25 | 6 | 26 | 21.4 | 2×2.5 | 22.6 | 54.8 | 470 |
| BNF 2805V-2,5 | 28 | 5 | 28.75 | 25.2 | 1×2.5 | 9.7 | 24.6 | 250 |
| BNF 2805V-5 | 28 | 5 | 28.75 | 25.2 | 2×2.5 | 17.5 | 49.2 | 500 |
| BNF 2805V-7,5 | 28 | 5 | 28.75 | 25.2 | 3×2.5 | 24.8 | 73.8 | 740 |
| BNF 2806V-2,5 | 28 | 6 | 28.75 | 25.2 | 1x2.5 | 9.6 | 24.6 | 250 |
| BNF 2806V-5 | 28 | 6 | 28.75 | 25.2 | 2×2.5 | 17.5 | 49.2 | 500 |
| BNF 2806V-7.5 | 28 | 6 | 28.75 | 25.2 | 3×2.5 | 24.8 | 73.8 | 740 |
| BNF 3205V-2.5 | 32 | 5 | 32.75 | 29.2 | 1×2.5 | 10.2 | 28.1 | 280 |
| BNF 3205V-5 | 32 | 5 | 32.75 | 29.2 | 2×2.5 | 18.5 | 56.3 | 560 |
| BNF 3205V-7.5 | 32 | 5 | 32.75 | 29.2 | 3×2.5 | 26.2 | 84.4 | 810 |
| BNF 3206V-2.5 | 32 | 6 | 33 | 28.4 | 1×2.5 | 13.9 | 35.2 | 290 |
| BNF 3206V-5 | 32 | 6 | 33 | 28.4 | 2x2.5 | 25.2 | 70.3 | 580 |
| Moern afmetings | Skruinsteek träge moment/mmkg·m²/mm |
Noot massakg |
Skaft massakg/m |
Maksimum toelaatbaar rotasiesnelheidmin- |
|||||||
| Buite deursnedeD |
Flens deursnee D₁ |
Oueral lengteL |
H | B₁ | PCD | d₁ ×d₂Xh | Smeer gat A |
||||
| 36 | 59 | 53 | 11 | 42 | 47 | 5.5×9.5×5.5 | M6 | 5.05×10- | 0.42 | 1.42 | 5000 |
| 40 | 60 | 41 | 10 | 31 | 50 | 4.5×8×4.5 | M6 | 5.05X10- | 0.37 | 1.37 | 5000 |
| 40 | 60 | 56 | 10 | 46 | 50 | 4.5×8×4.5 | M6 | 5.05×10 | 0.49 | 1.37 | 5000 |
| 40 | 63 | 37 | 11 | 26 | 51 | 5.5×9.5×5.5 | M6 | 1.23×10- | 0.3 | 2.22 | 4870 |
| 40 | 63 | 49 | 11 | 38 | 51 | 5.5×9.5×5.5 | M6 | 1.23×10-7 | 0.49 | 2.22 | 4870 |
| 44 | 67 | 41 | 11 | 30 | 55 | 5.5×9.5×5.5 | M6 | 1.23×10-7 | 0.46 | 2.19 | 4810 |
| 44 | 67 | 56 | 11 | 45 | 55 | 5.5×9.5×5.5 | M6 | 1.23X10- | 0.6 | 2.19 | 4810 |
| 46 | 74 | 58 | 15 | 43 | 59 | 5.5×9.5×5.5 | M6 | 1.23×10-7 | 0.68 | 2.46 | 4810 |
| 46 | 69 | 36 | 11 | 25 | 57 | 5.5×9.5×5.5 | M6 | 3.01×10-7 | 0.21 | 3.6 | 3920 |
| 46 | 69 | 48 | 11 | 37 | 57 | 5.5×9.5×5.5 | M6 | 3.01×10-7 | 0.55 | 3.6 | 3920 |
| 50 | 73 | 40 | 11 | 29 | 61 | 5.5X9.5X5.5 | M6 | 3.01X10 | 0.52 | 3.52 | 3880 |
| 50 | 73 | 55 | 11 | 44 | 61 | 5.5×9.5×5.5 | M6 | 3.01X10- | 0.68 | 3.52 | 3880 |
| 53 | 76 | 44 | 11 | 33 | 64 | 5.5X9.5X5.5 | M6 | 3.01×10-7 | 0.61 | 3.43 | 3840 |
| 53 | 76 | 62 | 11 | 51 | 64 | 5.5×9.5×5.5 | M6 | 3.01×10-7 | 0.91 | 3.43 | 3840 |
| 55 | 85 | 44 | 12 | 32 | 69 | 6.6×11×6.5 | M6 | 4.74×107 | 1.02 | 4.45 | 3470 |
| 55 | 85 | 59 | 12 | 47 | 69 | 6.6×11×6.5 | M6 | 4.74×10-7 | 1.06 | 4.45 | 3470 |
| 55 | 85 | 74 | 12 | 62 | 69 | 6.6×11×6.5 | M6 | 4.74×107 | 1.16 | 4.45 | 3470 |
| 55 | 85 | 50 | 12 | 38 | 69 | 6.6×11×6.5 | M6 | 4.74×10- | 0.87 | 4.52 | 3470 |
| 55 | 85 | 68 | 12 | 56 | 69 | 6.6×11×6.5 | M6 | 4.74X10-7 | 1.09 | 4.52 | 3470 |
| 55 | 85 | 86 | 12 | 74 | 69 | 6.6×11×6.5 | M6 | 4.74×10-7 | 1.3 | 4.52 | 3470 |
| 58 | 85 | 41 | 12 | 29 | 71 | 6.6x11x6.5 | M6 | 8.08X10- | 0.76 | 5.89 | 3050 |
| 58 | 85 | 56 | 12 | 44 | 71 | 6.6×11×6.5 | M6 | 8.08×10-7 | 0.94 | 5.89 | 3050 |
| 58 | 85 | 71 | 12 | 59 | 71 | 6.6x11x6.5 | M6 | 8.08x10 | 1.13 | 5.89 | 3050 |
| 62 | 89 | 45 | 12 | 33 | 75 | 6.6×11×6.5 | M6 | 8.08×10-7 | 0.94 | 5.88 | 3030 |
| 62 | 89 | 63 | 12 | 51 | 75 | 6.6×11×6.5 | M6 | 8.08X10- | 1.21 | 5.88 | 3030 |
Teken in op ons nuusbrief vir daaglikse nuut en opdaterings
Shanghai, China
YOSOmachinery
Kopiereg © Jingpeng Machinery&Equipment(Shanghai) Co.,Ltd Alle regte voorbehou
EN
AR
BG
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RU
ES
SV
TL
ID
UK
VI
HU
TH
TR
FA
AF
MS
SW
GA
CY
BE
KA
LA
MY
TG
UZ
